Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- FRAC Code
- Agrochemical Functions
- Technologies
- Product Families
- Composition
- ACTIVE INGREDIENT
- Copper Oxychloride (CAS No. 1332-40-7) - 16.81%
- Copper Hydroxide (CAS No. 20427-59-2) - 15.36%
- OTHER INGREDIENTS - 67.83%
- Total - 100.00%
Features & Benefits
- Agrochemicals Features
- Product Highlights
- Dual forms of copper for immediate plant protection plus extended residual, maximizing crop protection for the best crop quality possible.
- Excellent wash-off resistance for the best protection possible during and after rains, giving you peace-of-mind knowing Badge SC is still working no matter what Mother Nature throws at you.
- The best mixing liquid copper formulation available; goes into solution and stays in solution.
- No blue residue, for more desirable fresh produce.
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Fungicide Target Species
- Directions For Use
- It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
- Do not apply this product in a way that will contact workers, adults, children or pets, either directly or through drift. Only protected handlers may be in the area during application. For any requirements,specific to your State or Tribe, consult the State or Tribal agency responsible for pesticide regulation
Properties
- Physical Form
Safety & Health
- Hazards To Humans And Domestic Animals
- CAUTION / PRECAUCION : Harmful if swallowed. Harmful if absorbed through skin. Causes moderate eye irritation. Avoid contact with eyes, skin or clothing.
- Personal Protective Equipment (PPE)
Some materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for category A on an EPA chemical-resistance category selection chart.
Mixers, loaders, applicators, and other handlers must wear the following:
- long-sleeved shirt and long pants
- shoes plus socks
- chemical-resistant gloves such as Natural Rubbe
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing and other absorbent material that have been drenched or heavily contaminated with the product’s concentrate. Do not reuse them
- User Safety Recommendations
- Users should wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. Users should remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Users should remove PPE immediately after handling this product. As soon as possible, wash thoroughly and change into clean clothing. Wash the outside of gloves before removing.
- Environmental Hazards
- This pesticide is toxic to fish and aquatic invertebrates and may contaminate water through runoff. This product has a potential for runoff for several months or more after application. Poorly draining soils and soils with shallow water tables are more prone to produce runoff that contains this product. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. Do not apply directly to water, to areas where surface water is present, or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment washwaters or rinsate.
Storage & Handling
- Storage and Disposal
- Do not contaminate water, food, or feed by storage or disposal.
- Pesticide Storage : Store under well-vented, cool and dry storage conditions. Do not store under moist conditions.
- Pesticide Disposal: Wastes resulting from the use of this product must be disposed of on site or at an approved waste disposal facility.
- Container Handling: This is a non-refillable container. Do not reuse or refill this container. Empty the package completely into application equipment by shaking and tapping sides.Then dispose of the empty container according to state and local regulations. Place in trashor offer for recycling if available or return it to the Seller, or, if allowed by state and local authorities, by burning. If burned stay out of smoke.
- For rigid, non-refillable containers (2.5 to 5 gallons) : Non-refillable container. Do not reuse or refill this container. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip.Fill the container one-fourth full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this proceduretwo more times. Then offer for recycling, if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of resulting smoke.
- For rigid, non-refillable containers that are too large to shake (with capacities greater than 5 gallons) : Non-refillable container. Do not reuse or refill this container. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container one-fourth full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Then offer for recycling, if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of resulting smoke.
- Pressure Rinse Procedures (all sizes) : Pressure rinse as follows: Empty the remaining contents into application equipment or a tank mix and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip