Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- IRAC Code
- Agrochemical Functions
- Technologies
- Product Families
- Composition
- ACTIVE INGREDIENT
- Chlorpyrifos: O,O-diethyl O-(3,5,6-trichloro-2 pyridinyl) phosphorothioate . - 75.0%
- OTHER INGREDIENTS - 25.0%
- Total - 100.0%
Features & Benefits
- Product Highlights
- Better residual efficacy, improved crop safety, lower odor, significantly reduced dust, and more rainfast than the 4E and 50W formulations
- Is not a Federally restricted-use pesticide
- Continues to have the insect spectrum equivalent to the 4E and 50W formulations and still has excellent knockdown and residual activity
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Insecticide Target Species
- Directions For Use
- It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
- Read all Directions for Use carefully before applying.
- Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation.
Properties
- Formulation Type
- Physical Form
Regulatory & Compliance
- Chemical Inventories
Safety & Health
- Hazards To Humans And Domestic Animals
- May Be Fatal If Swallowed · May Be Fatal IfInhaled
- Do not breathe dust.Wear a mask or pesticide respirator jointly approved by the Mine Safety and Health Administration and the National Institute for Occupational Safety and Health. Wash thoroughly with soap and waterafter handling and before eating, drinking, or using tobacco. Remove contaminated clothing and wash clothing before reuse.
- Personal Protective Equipment (PPE)
Materials that are chemical-resistant to this product are barrier laminate and viton
Mixers and loadersmust wear:
- Long-sleeved shirt and long pants
- Socks and shoes
- Chemical-resistant gloves
- Chemical-resistant apron
Applicators using aerial application equipment must wear:
- Long-sleeved shirt and long pants
- Shoesand socks
See Engineering Controls for additional requirements.
All other handlers must wear:Coveralls over long-sleeved shirt and long pants
- Chemical-resistant gloves
- Chemical-resistant apron when mixing or loading
- Chemical-resistant footwear plus socks
- Chemical-resistant headgear for overhead exposures
- A NIOSH-approved dust mist filtering respirator with MSHA/NIOSH approval number TC-21C or a NIOSH-approved respirator with any N, P, R or HE filter.
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
- Engineering Controls
- Water soluble packets, when used correctly, qualify as a closed mixing/loading system under the Worker Protection Standard (WPS) for Agricultural Pesticides [40 CFR 170.240(d)(4)]. Mixers and loaders using water soluble packets must wear the PPE required above for mixer/loaders, and have immediately available for use in emergency (such as a broken package, spill or equipment breakdown) additional PPE. These PPE include coveralls and chemical-resistant footwear and a NIOSH-approved dust mist filtering respirator with MSHA/NIOSH approval number prefix TC-21C or a NIOSH-approved respirator with any N, P or HE filter
- Pilots must use an enclosed cockpit in a manner that meets the requirements listed in the WPS for agricultural pesticides [40 CFR 170.240(d)(6)].
- Use of human flaggers is prohibited. Mechanical flagging equipment must be used.
- When applicators use closed cab motorized ground equipment in a manner that meets the requirements listed in the WPS for agricultural pesticides [40 CFR 170.240(d)(4-6)], then handler PPE requirements may be reduced or modified as specified in the WPS.
- User Safety Recommendations
Users should:
- Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
- Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
- Environmental Hazards
- This pesticide is toxic to fish, aquatic invertebrates, small mammals and birds. Do not apply directly to water, to areas where surface water is present, or to intertidal areas below the mean high water mark. Drift and runoff from treated areas may be hazardous to aquatic organisms in water adjacent to treated areas. Do not contaminate water when cleaning equipment or disposing of equipment washwaters. This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do not apply this product or allow it to drift to blooming crops or weeds if bees are visiting the treatment area.
Storage & Handling
- Storage and Disposal
- Do not contaminate water, food or feed by storage or disposal.
- Pesticide Storage: Store in original container in secured dry storage area. Prevent cross-contamination with other pesticides and fertilizers. Avoid storing above 122°F forextended periods of time. If container is damaged or spill occurs, use product immediately or dispose of product and damaged container as indicated below. Packets may become brittle when stored below 32°F. Handle carefully to avoid breakage.
- Pesticide Disposal: Waste resulting from the use of this product (that cannot be used according to label instructions) may be disposed of on site or at an approved waste disposal facility.
- Container Handling:Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available.