Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- HRAC/WSSA Group
- Agrochemical Functions
- Technologies
- Product Families
- Composition
- ACTIVE INGREDIENT
- Ethyl(R)-2-[4-(6-chloroquinoxalin-2-yl oxy)phenoxy] propionate . - 10.3%
- OTHER INGREDIENTS - 89.7%
- Total - 100.0%
Features & Benefits
- Product Highlights
- Faster and more complete control of volunteer corn compared to clethodim brands, for higher soybeans yields and return-on-investment
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Directions For Use
- It is a violation of federal law to use this product in a manner inconsistent with its labeling. TARGA must be used only in accordance with instructions on this label or in separate published Gowan instructions.
- Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.
Properties
Safety & Health
- Hazards To Humans And Domestic Animals
- DANGER! Corrosive. Causes irreversible eye damage. Harmful if swallowed, inhaled or absorbed through the skin. Do not get ineyes, on skin, or on clothing.Avoid breathing vapors or spray mist.Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet. Remove and wash contaminated clothing before reuse.
- Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
- Long-sleeved shirt and long pants.
- Chemical-resistant gloves, such as barrier laminate or Viton.
- Shoes plus socks.
- Protective eyewear.
Discard clothing or other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
- Engineering Controls
- When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR part 170.240 (d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
- User Safety Recommendations
Users should:
- Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
- Remove personalprotective equipment immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
- Hazards
- This pesticide is toxic to fish and invertebrates. Do not apply directly to water, to areas where surface water is present, or to intertidal areas below the mean high water mark. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. Donot contaminate water when disposing ofequipment wash waters or rinsate.
- This product may contaminate water through drift of spray in wind. This product has a potential for runoff for several monthsor more after application. Poorly draining soils and soils with shallow water tables are moreprone to produce runoff that contains this product. A level, well maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, streams, and springs will reduce the potential for contamination of water from rainfall-runoff. Runoff of this product will be reduced by avoiding applications when rainfall is forecasted to occur within 48 hours. Sound erosion control practices will reduce this product’s contributionto surface water contamination.
- Combustible. Keep away from heat, sparks, and open flames. Keep container closed.
Storage & Handling
- Storage and Disposal
- Do not contaminate water, food or feed by storage and disposal
- PESTICIDE STORAGE: Store product in original container only. Store in a cool dry place.
- PESTICIDE DISPOSAL:Wastes resulting from the use of this product must be disposed of on site or at an approved waste disposal facility.
- CONTAINERHANDLING:Nonrefillable container. Do not reuse or refill this container. Offer for recycling, if available. For Plastic Containers:Triple rinse container (or equivalent) promptly after emptying. Then offer the container for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds afterthe flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
- For Plastic Containers:Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeatthis procedure two more times.
- CONTAINER DISPOSAL:For Bulk Containers -Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment ormix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times.