Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
Due to its combination of mechanical properties, ESCR resistance & fluidity, GREENETHENE G-3904U is suggested for the production of Playground equipment, manholes, storage containers, chemical & Oil tanks.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Melt Flow Index (190 °C/2.16 Kg) | 4.0 | gm/10 min | ASTM D1238 |
Density (23 °C) | 0.94 | gm/cm3 | ASTM D1505 |
PIAT (Peak Internal Air Temp) (5 mm) | 200.0 | °C | TPE Method |
Dry Flow (Pourability for 35 Mesh) | 22.0 | Secs | ARM Standard |
Bulk Density | 450.0 | Kg/m3 | ASTM D1525 |
Tensile Strength at Yield | 21 (204) | MPa (Kg/cm) | ASTM D638 |
Tensile Strength at Break | 25 (255) | Mpa (Kg/cm) | ASTM D638 |
Elongation at Break | 950.0 | % | ASTM D638 |
Notched Izod Impact Strength (Partial Break) | 50.0 | Kg.cm/cm | ASTM D256 |
ARM Low Temperature Impact Test (5 mm) | 27 (110) | J/mm (lb-ft) | ARM Standard |
Flexural Modulas | 750 (7650) | Mpa (Kg/cm) | ASTM D790 |
ESCR (F50,100% Igepal, 1.9 mm, 50°C) | 500.0 | hr | ASTM D1693 |
Vicat Softening Point | 118.0 | °C | ASTM D1525 |
Durometer Hardness | 57.0 | Shore D | ASTM D2240 |
Regulatory & Compliance
- Regulatory Information
GREENETHENE G-3904U meets the requirement stipulated in standard IS:10141:2001 on “Specification for Polyethylene for safe use in contact with foodstuff, pharmaceuticals & Drinking Water”. It also conforms to IS 12701:1996 –“Specification For Rotational Molded Polyethylene Water Storage Tanks.”.
Packaging & Availability
- Packaging Type
- Custom Grades
Different rotomoulding applications can require different grades of material. We produce customize grades by compounding different Materials and by altering the grinding specification as required. For example if you need a material that is very stiff but also flows well we can produce a high density grade with a high melt flow and we can also alter the grinding specification to enhance mouldability.
Storage & Handling
- Storage Conditions
Bags should be stored in dry/closed conditions at temperature below 50 0C.