Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Chemical base
- Acrylic dispersion
- Filling capacity
- Good
- UV resistance
- Good
- Technologies
- Product Families
- Preparation
Working Conditions:_x001c_Only apply at temperatures between +5°C
and +40°C.
Surface Requirements:_x001c_The surface must be dry, clean and free of
dust, rust and grease.
Preliminary Surface Treatment:_x001c_For a better adhesion on porous
(highly porous) substrates, they should be first covered with a
diluted acrylic solution (1 part sealant to 2 parts water). For a
good result, cover the joint’s edges with masking tape. Ensure
a minimum joint width of 6 mm. Up to a joint width of 12 mm,
ensure a joint depth of 6 mm. In case of wider joint widths, the
joint depth should be half the joint width. Remove masking tape
immediately after tooling.
Tools:_x001c_Sealant gun, Sealant smoother
Features & Benefits
- Ready-to-Use Product Features
- Properties
Paintable
· Easy to tool
· Colourfast
· All-weather resistant
· Resistant to cleaning agents
· With resealable spout
Applications & Uses
- Markets
- Applications
- Field Of Application
Suitable for sealing seams, joints and gaps in, e.g., partitions,
walls, ceilings, window frames, window sills, stairs and skirting
boards. Bonds, among other things, to plasterwork, drywall,
(cellular) concrete, bricks, masonry, wood, glass, metal and
synthetics.
Not suitable for bitumen, polyethylene (PE), polypropylene (PP),
PTFE and silicone.- Application
Coverage: Content suitable for approx. 8 to 15 m (depending on
the diameter of the joint).
Directions for use:_x001c_
Apply sealant evenly up to the bottom of the joint and then
smooth within 5 minutes using a wet finger, putty knife or
sealant smoother. Close the cartridge properly immediately after
use.
Stains/residue:_x001c_Remove wet stains immediately with water. Cured
sealant residue can only be removed mechanically.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | approx. 1,71 | g/cm³ | — |
| Hardness (Shore A) | 30.0 | — | — |
| Max. allowed distortion | 7.5 | % | — |
| Drying/Curing time | approx. 8-14 days for complete cure, depending on relative air humidity and temperatures. | — | — |
| Elasticity | Limited | — | — |
| Maximum temperature resistance | 75.0 | °C | — |
| Mildew resistance | Nil | — | — |
| Minimum temperature resistance | -20.0 | °C | — |
| Solid matter | approx. 78 | % | — |
| Viscosity | Pasty | — | — |
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage Conditions
Minimum of 30 months if stored in properly sealed packaging
in a dry place at a temperature between +5°C and +25°C.
Limited shelf life after opening.
Store in well-sealed packaging in a cool, dry and frost free
place.