Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Preparation
Working Conditions:_x001e_Only apply at temperatures between +5°C
and +40°C.
Personal safety:_x001e_Wear gloves and safety goggles and provide
adequate ventilation.
Surface Requirements:_x001e_The substrate must be thoroughly clean
and free of grease. Slightly moisten dry surfaces.
Tools:_x001e_PU-Foam Gun
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Properties
· Non-shrinking
· Large filling capacity
· High insulation value
· Flammability class B2
· Paintable
· Water resistant
· Chemical resistant
· CFC and HCFC-free (ozone friendly)
Applications & Uses
- Applications
- Application Area
- Application Method
- Field Of Application
Suitable for insulating, sealing and filling of seams, joints,
gaps, holes and cracks in wall partitions, window and door
frames, roof boards, chimneys, dormers and penetrations of
pipes, tubes, cables and power lines. Bonds to many building
materials, such as wood, concrete, stone, masonry, plasterwork,
metal, glass and many synthetics, including polystyrene,
polyester and PVC.
Not suitable for bitumen, silicone, polyethylene (PE),
polypropylene (PP) and P.T.F.E.- Application
Directions for use:
Mount the aerosol on the PU Foam gun. By pulling the trigger,
the foam can be dosed easily and precisely. Hold the can upside
down while spraying. Fill the area for about 65%. For filling
large volumes apply foam in layers and allow to fully froth.
Moisten between each layer. After curing, the foam can be cut,
drilled and painted, and, if desired, plastered. After use, clean
the gun with GRIFFON PU cleaner.
Stains/residue:_x001e_Remove wet stains immediately with GRIFFON
PU-Foam Cleaner or acetone. Cured stains can only be removed
mechanically.
Properties
- Physical Form
Regulatory & Compliance
- Standards
DIN 4102-1: Flammability of construction
products, classification B2: Fire retardant.
Storage & Handling
- Storage Conditions
Minimum 18 months.
Broken packaging has very limited storage life.
Store upright in properly sealed packaging in a dry place
between +5°C and +25°C.