Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Preparation
Working Conditions:_x001c_Do not use in temperatures , +5°C.
Personal safety:_x001c_It is recommended that rubber or plastic gloves
are worn.
Preliminary Surface Treatment:_x001c_Surfaces should be clean, dry and
free of dust and grease. When necessary degrease the parts
with Bison Professional Cleaner or acetone. Smooth surfaces
should first be roughened with sandpaper. In case of wood
bonding, the wood humidity content may not exceed 18%.
Tools:_x001c_Mixing tray (clean and dry), putty knife or glue spreader.
Thoroughly clean tools immediately after use with Bison
Professional Cleaner, MEK or acetone.
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Properties
100% filling
· Waterproof
· All-weather resistant
· Chemical resistant
· Solvent-free
· Thixotropic
Applications & Uses
- Applications
- Field Of Application
For bonding many difficult to bond materials having to
withstand extreme conditions. Suitable for practically all
materials, such as metal, polyester, foam materials (polystyrene
foam), wood, (natural) stone, concrete, ceramics, glass, PVC
foil, rubber and many synthetics.- Application
Coverage: Approx. 1.5-3.5 m²/kg
Directions for use:
Apply the adhesive mixture, which only needs to be applied
on one side, to the surface or the material to be bonded with
a putty knife or glue spreader. With soft materials such as
rubber tactile tiles and artificial grass, and when affixing tiles,
apply the adhesive mixture to the surface with a coarse toothed
glue spreader (No 3). In case of rubber floor covering, first
perform an adhesive test. Construction boards can be affixed
by applying spots of adhesive. Depending on the weight of
the material to be bonded, intervals of 20-40 centimeters
should be maintained between the spots of adhesive. Always
apply an additional spot of adhesive on the corners of any
construction board to be bonded. For full surface bonding to
smooth surfaces, use a glue spreader no. 2. Place the material
to be bonded in the correct position and firmly press into the
adhesive. Preferably, clamp or support during curing. Remove
outwardly pressed adhesive immediately.
Stains/residue:Remove wet adhesive residue immediately with
Bison Professional Cleaner. Dry adhesive residue can only be
removed mechanically.
Points of attention:The individual components may not come in
contact with each other or with water. Foaming of the hardener
or mixture indicates that the adhesive has become unusable.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage Conditions
A minimum of 24 months.
Limited shelf life after opening.
Store dry in sealed packaging between +10°C and +20°C.