Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Chemical base
- Modified Bitumen
- Chemicals resistance
- Very good
- UV resistance
- Very good
- Technologies
- Product Families
- Preparation
Working Conditions:! To only be used at temperatures above +5°C.
Preliminary Surface Treatment:! Surfaces must be dry, clean, and
free of dust and grease. The use of a water based acrylic
primer on porous or corroded/damaged surfaces can enhance
the adherence of HBS-200® and can minimalize bladder
formation.
Tools:! Brush, roller or airless spray device.
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Properties
Waterproof and airtight
· Very high level of permanent elasticity (900%)
· Excellent bonding to many substrates
· Durable quality: durability of minimum 20 years (tested
according to EN 1297)
· Protects against corrosion and erosion
· Easy to apply
· All-weather and UV resistant
· Salt and chemical resistant
· Paintable
· Solvent-free
· VOC-free
· Non-toxic
· Water-based
Applications & Uses
- Markets
- Application Area
- Field Of Application
Suitable for sealing and protecting a wide variety of materials,
such as concrete, metal, stone, wood, bitumen, zinc, PVC,
EPDM (test first), etc. For floors, partitions, walls, seams, joints,
conduits and structural components. Excellent for both interior
and exterior applications (bathrooms, cellars, balconies, roofs,
etc.) including gutters, shower basins, conduit ducts, floor
seams, expansion joints, window frame joints and ground level
items. Also suitable as a waterproof layer under tiles in damp
environments such as bathrooms, swimming pools, balconies,
terraces, etc.- Application
Coverage: Waterproofing: ± 2.7 l/m2 at a dry film thickness of
2mm. Airtight Construction: ± 1 l/m2 at a dry film thickness of
0.7mm
Directions for use:!
Before use, stir manually until a homogenous color is obtained.
It is not recommended to use an electric mixer with a high
rotational speed for stirring. Apply in multiple layers. Preferably,
let the previous layer properly dry before applying the next
layer. Drying time depends on relative humidity, temperature
and surface. For seam, crack and tear-bridging applications,
GRIFFON HBS-200® GeoTextile should be used. GRIFFON
HBS-200® GeoTextile must be applied in still wet HBS-200®
Liquid Rubber. Then immediately level off with a second layer of
HBS-200® Liquid Rubber. Always ensure a layer thickness of at
least 2 mm after curing.
Stains/residue:! Immediately remove wet residue with water,
GRIFFON Wipes or GRIFFON Hand Cleaner. Dried residue can
only be removed mechanically.
Points of attention:! To only be used at temperatures above
+5°C. After approximately 60 minutes a surface skin forms,
which can be loaded with (light) rainfall after 4 hours.
Completely waterproof after 24 hours. If a joint sealant is
used in combination with HBS-200® Liquid Rubber / Rubber
Tix, we strongly recommend to use a neutral silicone sealant,
for example GRIFFON S-200, to prevent discoloration of the
sealant.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Drying/Curing time | approx. 48 | hours | - |
| Elasticity | Very good | - | - |
| Maximum application temperature | 160.0 | °C | - |
| Minimum temperature resistance | -20.0 | °C | - |
| Moisture resistance | Very good | - | - |
| Solid matter | approx. 60 | % | - |
| Viscosity | Thick liquid | - | - |
Regulatory & Compliance
- Certificates
Liquid-applied water impermeable products
for use beneath ceramic tiling bonded with
adhesives. (EN 14891)Polymer modified bituminous thick coatings for
waterproofing. (EN 15814)Products and systems for the protection
and repair of concrete structures. Surface
protection systems for concrete. (EN 1504-2)- Standards
(Leadership in Energy and Environmental
Design): IEQ CREDIT 4.2: Low-emitting
materials paints and coatings. Product type:
waterproofing sealers.Flexible sheets for waterproofing.
Bitumen, plastic and rubber sheets for roof
waterproofing. Method of artificial aging by
long term exposure to the combination of UV
radiation, elevated temperature and water.Thermal performance of buildings - Air
permeability of building components and
building elements: completely airtightWatertight covering kits for wet room floors
and or walls.Windows and doors - Air permeability:
completely airtight.Windows and doors – Watertightness:
completely watertight.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage Conditions
A minimum of 24 months.
Limited shelf life after opening.
Properly sealed packages should be stored in a dry, cool, frostproof
location at temperatures between +5°C and +25°C.