company tower banner

Products

Grupa Azoty S.A

9 Products found on Grupa Azoty S.A in Structural Components

SDSWith SDS

TDSWith TDS

Tarnoform® 300 SI banner

Tarnoform® 300 SI

Polymer Name:Polyacetal Copolymer (POM)
Processing Methods:Injection Molding

Grupa Azoty S.A Tarnoform® 300 SI is an Acetal (POM) Copolymer material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnoform® 300 SI are: Flame Rated Chemical Resistant Bacteria Resistant Copolymer Fatigue Resistant Typical applications include: Engineering/Industrial Parts Automotive Plumbing/Piping/Potable Water

Tarnoform® 300 TF2 banner

Tarnoform® 300 TF2

Polymer Name:Polyacetal Copolymer (POM)
Processing Methods:Injection Molding
Additives Included:Lubricant (Unspecified)
Flexural Modulus:2250.0 - 2250.0 MPa

Grade with lowered wear and friction coefficient modified with PTFE ISO 9988-1: POM-K, M-GNS2, 03-002

Tarnoform® 300 FT1,4 banner

Tarnoform® 300 FT1,4

Polymer Name:Polyacetal Copolymer (POM)
Processing Methods:Injection Molding
Additives Included:Lubricant (Unspecified)
Flexural Modulus:2300.0 - 2300.0 MPa

Grade with lowered wear and friction coefficient modified with small amount of PTFE ISO 9988-1: POM-K, M-GNS2, 03-002

Tarnoform® 300 TF05 banner

Tarnoform® 300 TF05

Polymer Name:Polyacetal Copolymer (POM)
Processing Methods:Injection Molding
Additives Included:Lubricant (Unspecified)
Flexural Modulus:2400.0 - 2400.0 MPa

Grade with lowered wear and friction coefficient modified with small amount of PTFE ISO 9988-1: POM-K, M-GNS2, 03-002

Tarnamid® T-27 GF30 V2 banner

Tarnamid® T-27 GF30 V2

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber

Grupa Azoty S.A Tarnamid® T-27 GF30 V2 is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 GF30 V2 are: Flame Rated Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable Typical applications include: Automotive Engineering/Industrial Parts Construction Applications Electrical/Electronic Applications Fabrics/Fibers

Tarnamid® T-27 MK30 banner

Tarnamid® T-27 MK30

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Fillers Included:Mineral

Grupa Azoty S.A Tarnamid® T-27 MK30 is a Polyamide 6 (Nylon 6) material filled with 30% mineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 MK30 are: Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable Good Esthetics Typical applications include: Automotive Engineering/Industrial Parts Construction Applications Electrical/Electronic Applications Fabrics/Fibers

Tarnamid® T-27 GF30 V0 banner

Tarnamid® T-27 GF30 V0

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Additives Included:Impact Modifier

Tarnamid® T-27 GF30 V0 is a polyamide 6 containing 30% glass reinforced, heat stabilized, flame retardant.

Tarnoform® 300 TF4 banner

Tarnoform® 300 TF4

Polymer Name:Polyacetal Copolymer (POM)
Processing Methods:Injection Molding
Additives Included:Lubricant (Unspecified)
Flexural Modulus:2450.0 - 2450.0 MPa

Grade with significantly lowered wear and friction coefficient modified with PTFE ISO 9988-1: POM-K, M-GNS2, 02-002

Tarnoform® 300 TF banner

Tarnoform® 300 TF

Polymer Name:Polyacetal Copolymer (POM)
Processing Methods:Injection Molding
Additives Included:Lubricant (Unspecified)
Flexural Modulus:2400.0 - 2400.0 MPa

Economical grade with lowered wear and friction coefficient with low amount of PTFE ISO 9988-1: POM-K, M-GNS2, 03-002