Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
Contains no solvents
Excellent adhesion
Excellent hydrolytic stability
Applications & Uses
- Markets
- Applications
- Application Area
- INSTRUCTIONS FOR USE
TO MIX BY HAND: Proportion out components according to parts by weight or volume ratio into a non-reactive container (polyethylene, polypropylene or metal de-rimmed can). Container should be about five times larger than the volume of mixed material. Mix components very thoroughly, preferably with a metal spatula, scraping the sides and bottom of the container to incorporate all material.
Remove the air entrapped during mixing by placing the container of mixed material into a vacuum chamber. Under vacuum, the level of mixed material will rise and then drop with strong, bubble-breaking action. Do not allow the contents to rise over the top of the container while removing the air. Allow the material to de-gas (de-air) until the liquid level drops and bubbling is minimal. At this point, release the vacuum. If working time allows, transfer material to a clean container, without scraping the sides or bottom, before applying. If working time does not allow transfer, material should be used immediately.
Properties
- Component A
- Physical Properties
- Component B
- Handling Properties
| Value | Units | Test Method / Conditions | |
| Density | 9.8 | lb/gal | - |
| Viscosity | 200 | cps | - |
| Color | Amber | - | - |
| Value | Units | Test Method / Conditions | |
| Hardness | 85 – 95 | Shore A | - |
| Water Absorption | max. 0.1 | % | - |
| Dielectric Strength | 323 | v/mil | (ASTM D149-97a Method A) |
| Dielectric Constant | 3.83 (ASTM D150-98) | k | - |
| Volume Resistivity | 4.932 E+15 (ASTM D257-99) | Ω· cm | - |
| Coefficient Of Thermal Expansion | 0.0012 | in/C | - |
| Thermal Conductivity (Cal/(Sec)(Sq Cm)(C)(Cm)) | min.= 14E+4 | - | - |
| Temperature Range Of Use | -40 – +80 | ºC | - |
| Value | Units | Test Method / Conditions | |
| Density | 12.9 | lb/gal | - |
| Viscosity | 10000 | cps | - |
| Color | Black | - | - |
| Value | Units | Test Method / Conditions | |
| Mix Ratio By Weight | 24 A : 100 B | - | - |
| Gel Time | 1 – 2 | hours | - |
| Cure Time At Room Temperature | 24 | Hours | - |
Storage & Handling
- Shelf Life
- 12 Months, 6 Months