Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Characteristics
GSP 1603-6DS is a cost effective, two-component, polyurethane compounds specifically developed for electrical potting encapsulation.
- Features
Contains no solvents
Excellent adhesion
Excellent hydrolytic resistance
Available 1A:4B side-by-side cartridge
Applications & Uses
- Markets
- Applications
- INSTRUCTIONS FOR USE
SIDE-BY-SIDE (SBS) CARTRIDGE:
The recommended method to ensure an accurate mix ratio when dispensing material from a SBS tube through a static mixer nozzle is as follows:
1. Remove the nozzle tip-cap by twisting and pulling it off. Do not discard tip cap unless all the material in SBS tube is used. Save for reattachment to seal remaining material in the SBS tube.
2. Extrude enough material until there is an even flow of material from both openings. Discard this material extruded from the SBS tube.
3. Attach the mix static nozzle by twisting it on the nozzle tip. Extrude material until ~2-3 cm (~1 inch) of material has extruded. Discard this material extruded from the mixer.
4. Material can now be applied directly to the bonding surface.
5. When application is complete and there is still material remaining in the SBS tube, remove and discard the static mix nozzle.
6. Clean the tip-cap thoroughly to prevent cross contamination of the tip openings.
7. Attach tip-cap back onto the SBS tube.
Properties
- Color
- Component A
- Physical Properties
- Component B
- Handling Properties
| Value | Units | Test Method / Conditions | |
| Density | 10 | lb/gal | — |
| Viscosity | Low/Flowable | cps | — |
| Color | Brown | — | — |
| Value | Units | Test Method / Conditions | |
| Hardness | 85 – 95 | Shore A | — |
| Water Absorption | max. 0.1 | % | — |
| Dielectric Strength | 323 | v/mil | (ASTM D149-97a Method A) |
| Dielectric Constant | 3.83 (ASTM D150-98) | k | — |
| Volume Resistivity | 4.932E^15 (ASTM D257-99) | Ω· cm | — |
| Value | Units | Test Method / Conditions | |
| Density | 12.85 | lb/gal | — |
| Viscosity | 10000 | cps | — |
| Color | Black | — | — |
| Value | Units | Test Method / Conditions | |
| Mix Ratio By Weight | 19.4 A : 100 B | — | — |
| Mix Ratio By Volume | 25 A : 100 B | — | — |
| Gel Time | 10 – 20 | minutes | — |
| Cure Time At Room Temperature | Overnight | — | — |
Storage & Handling
- Shelf Life
- 9 Months