Products

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flyprene SIS 1106 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 15% and 17% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Dragonpovol Polyvinyl Alcohol (17-99 Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BF-17, PVA-117, and N-300, some famous bands in the market. It has been widely used as a glue & adhesive in construction, paper manufacturing as well as other industries for binding materials. It can also be used as a surface sizing agent in textiles, because of the low surface tension it may induce between two phases. Due to the active -OH groups in the chemical structure, it can be used as a modifier for Urea melamine resins which is a typical binder for plywood by aldol condensation between -OH and aldehydes.

Flyadd® AY20 is a liquid-type compounded anti-yellowing agent that can increase the thermal resistance and anti-aging properties of PU products. This highly efficient product has excellent anti-thermal oxygen and ultraviolet absorption functions and can effectively inhibit the yellowing caused by high-temperature processing or ultraviolet light.

Flyprene SIS 1209 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 29% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Dragonsorb® B75 is a mixture of an antioxidant, a benzotriazole-type ultraviolet absorber, and a hindered amine light stabilizer. This product is suitable for rim polyurethane and TPU, as well as sealants and adhesives. It has good applications in waterproof canvas, floors, and polyurethane coating in synthetic leather.

Dragonpovol Polyvinyl Alcohol (20-88 Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BP-20, PVA-220, and GH-17, some famous bands in the market. It has been widely used as a glue & adhesive in construction, paper manufacturing as well as other industries for binding materials. It can also be used as a surface sizing agent in textiles, because of its good ability to form a membrane on the textile surface. Due to the active -OH and -COOR groups in the chemical structure, it can reduce the surface tension of water solution to a large extent, which in return can be used as a dispersant in PVC suspension polymerization production.

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Dragonpovol Polyvinyl Alcohol (24-88 Grade) is a typical band of the PVA family, which is a good substitute for BP-24, PVA-224E, and GH-20/22/23, some famous bands used in the market. It can be used as glue & adhesive to disperse and bind construction materials such as concrete, mortar, plaster, etc. Due to the active -OH and -COOR groups in the chemical structure, it can reduce the surface tension of water solution to a large extent. It can be used as a primary dispersant in PVC suspension production, which in return boosts the bulk density of the PVC product.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Dragonox® 1726 is an effective thermo-oxidative stabilizer for adhesive materials. It is also suitable for SBS/SIS block copolymers and polyurethane sealants.

Flyprene SIS 1124 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 14% and 25% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Dragonsorb® 3853S functions as a UV absorber. This white or off-white granulated product finds application in the manufacture of PE tapes, injection moldings, sheets, metallocene, PP films, tapes, fibers, TPO polyacetals, ASA, ABS, and HIPS.

Dragonpovol Polyvinyl Alcohol (26-99 Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BF-26, the benchmark band in the market. It has been widely used in the adhesive industry for applications such as paper-tube glue, building glue in construction, ceramic binder, etc. This product can also be used as a stabilizer in PVAc emulsion dispersion or urea formaldehyde glue manufacturing.

Dragonpovol Polyvinyl Alcohol (17-98 Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BF-17, PVA-117, RS-2117, JF-17, and N-300, some famous bands in the market. It has been widely used as a glue & adhesive in construction, paper manufacturing as well as other industries for binding materials. It can also be used as a surface sizing agent in textiles, because of the low surface tension it may induce between two phases.

Flyprene SIS 1105 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Dragonsorb® 123 is a light stabilizer with low alkalinity. It is widely used in acrylic resin, polyurethane, sealant, adhesive, rubber, TPE and TPO blends, PVC, polystyrene, polypropylene, and other unsaturated resins. Additionally, as this product reacts in a cross-chain with other ingredients in the paint formula, it is especially recommended for the paint. It has excellent resistance to acid, flame retardant, sulfur, and catalyst residue.

Dragonpovol Polyvinyl Alcohol (22-88 Grade) is a normal band of the PVA family, which can totally be used as an equivalent for Mowiol-40-88 (from Kuraray GMBH), one of the famous bands in the market. It has been widely used as a glue & adhesive in construction, woodworking, paper, and other industries for binding materials. It can also be used as a surface sizing agent in textiles, because of the low surface tension it may induce between two phases.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Dragonpovol Polyvinyl Alcohol (17-88 Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BP-17, PVA-217, and JP-18, some famous bands in the market. It has been widely used as a glue & adhesive in construction, woodworking, paper, and other industries for binding materials. It can also be used as a surface sizing agent in textiles, because of the low surface tension it may induce between two phases.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flyprene SIS 1126 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 16% and 50% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Dragonpovol Polyvinyl Alcohol (30-99 Grade) is a normal band of the PVA family, which can generally be used in textile sizing material, adhesives & glues, coatings, emulsifiers, soil modifying agents, etc.

Flyeva 102H is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.