Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Thickener Type
- CPS No.
- 235212.0
- MSDS No.
- 6818.0
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Extreme-pressure high load carrying capacity
- Excellent corrosion and wear protection
- Excellent water resistance
- Excellent high temperature stability
- Outstanding low temperature pump-ability
Applications & Uses
- Applications
- Applications
- On-highway heavy duty trucks - These lubricants are perfect for a wide variety of Class 8 trucks in all chassis and wheel bearing applications ranging from automatic centralized greasing systems to wheel bearings operating near the high temperatures of disk brakes. This product is for all applications, from owner-operators to fleets (especially those considering extended service intervals).
- Off-highway vehicles - Whether the application is in construction, logging, mining, agriculture or utilities, these greases will perform. Use them in haul trucks, loaders, tractors, cherry pickers or any of a number of other off-highway vehicles,
- Medium- and light-duty trucks and busses - As with their heavy duty counterparts, the Class 7 and Class 6 vehicles and busses require an extreme duty grease, Dura-max Greases EP will provide that performance.
- Automobiles - HB-520 Greases EP are exceptional lubricants for high temperature wheel bearings and other high performance automotive applications.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Bearing Rust (10% Synthetic Water) | Pass | - | - |
Copper Corrosion | 1 B | - | - |
Dropping Point | 235.0 | °C | - |
Four-Ball Wear Scar Diameter | 0.45 | mm | - |
Four-Ball Weld Point | 400.0 | kg | - |
Lincoln Vent Meter (At 30s, 0°F) | 100.0 | psig | - |
Lincoln Vent Meter (At 30s, 30°F) | 50.0 | psig | - |
Lincoln Vent Meter (At 30s, 75°F) | 50.0 | psig | - |
Operating Temperature | -34 to 77 | °C | - |
Penetration (25°C, Unworked) | 430.0 | - | - |
Penetration (25°C, Worked, 60 Strokes) | 415.0 | - | - |
Texture | Tacky | - | - |
Thickener (Lithium Complex Type) | 4.0 | % | - |
Timken OK Load | 55.0 | lbs | - |
Viscosity Index | 100.0 | - | - |
Technical Details & Test Data
- Typical Test Data
Viscosity, Kinematic* cSt at 40°C 189 cSt at 100°C 17.5 Viscosity, Saybolt* SUS at 100°F 992 SUS at 210°F 90 Flash Point, °C(ºF)* 246(475) Note:
These products are formulated to perform in unusually demanding conditions of high and low temperatures. The lithium complex thickener in Dura-Max Greases EP elevates the dropping point to approximately 266°C (510°F). This high dropping point equates to excellent high temperature stability up to 177°C (350°F).
HB-520 Grease EP has the proper base oil viscosity to meet NLGI GC-LB requirements for low temperature operation. NLGI 1 and 2 are recommended for applications operating in the temperature range of -18°C to 177°C (O°F to 350°F). NLGI 00 and 0 can be used at temperatures as low as -34°C (-30°F).
HB-520 Grease EP exceeds the requirements of NLGI GC-LB for EP protection and rust protection, making them well suited for the most severe applications.
Dura-Max Grease EP is designed for extreme duty in a wide variety of industrial plant, on- and offhighway vehicle and equipment applications.
NLGI 1 and 2 are approved for the NLGI Certification Mark GC-LB. Dura-Max Grease EP meets the requirements of the Mack MG-C grease specification.