Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Product Type
- Technologies
- Product Families
- Product Specifications
- Color/Tinting: Pro White. May be tinted with up to 4 ounces of low VOC universal colorants.
- Vehicle Type: Vinyl copolymer
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
Hallman/lindsay’s Builders Legacy is our finest line of finishes designed for new drywall surfaces. All of our Builders Legacy products meet LEEDS criteria for new construction.
- Features
- Meets criteria set forth by the U.S. Green Building Council LEED-NC, version 2.2 and LEED-CI version 2.0.
- Higher Sheen
- Excellent Sealing Properties
- High Hiding
- Excellent Coverage
- Quick-Dry
- Low-Odor
- Zero VOC per EPA Method 24
Note: Material VOC content at or below 5g/L. This is based on an interpretation of the SCAQMD Rule 314 exemption for “Zero VOC equivalent” coatings.
- Performance Data
Performance alternate for Federal Paint Specification TT-P-650 D
Applications & Uses
- Markets
- Application Area
- Applications
Theoretical Coverage:
Apply at 400 sq.ft./gal. to achieve- 4.0 mils Wet Film Thickness
- 1.1 mils Dry Film Thickness
When calculating working coverage, allow for application losses, texture and porosity of surface, application technique, etc.
Drying Time at 77°F 50% R.H.:
- To touch: 1 hour
- Recoat: 2 hours
Thinning/Cleanup: Water
- Surface Preparation
On drywall, all taped joints and nail heads should be sanded smooth and dusted. Patch all holes and cracks with an appropriate patching compound. Let dry thoroughly, sand smooth and prime. Surfaces must be dry, clean and free of dirt, oil or any other contaminants.
Warning! If you scrape, sand or remove old paint, you may release lead dust. Lead is toxic. Exposure to lead dust can cause serious illness, such as brain damage, especially in children. Pregnant women should also avoid exposure. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop.
- Finishing Recommendations
Excellent choice under Eggshell, Satin and Semi-Gloss finishes. May be used as a primer under appropriate hallman/lindsay top coats.
- Application
Mix thoroughly before use. Apply by brush, roller, airless, HVLP or conventional spray. Flow and leveling is best achieved by applying a full, uniform coating and working to a wet edge using overlapping strokes. Surfaces should be dry prior to paint application. Reducing material for spray application should not exceed 10%.
- Equipment Requirements
- Airless: Minimum ½ GPM with .017” tip at 2000 PSI
- Conventional: Binks #7 gun, 38 needle, 36 air nozzle, 38 fluid nozzle, 9.3 CFM at 30 PSI
- HVLP: Twin-stage turbine, 5–8 PSI, .051 to .070 projector set
- Roller: ¼“ – ½” nap shed-7resistant cover or lambs wool cover
- Brush: 100% nylon or synthetic blend
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Gloss (85º) | 25.0 | Units | - |
| Solid Content by Volume | 26 - 30 | % | - |
| Solid Content by Weight | 40 - 44 | % | - |
| VOC | 0.0 | g/L | EPA Method 24 |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautions
- Do not apply to “hot“ plaster.
- Apply only if air, surface and material temperatures remain 50° F or above during application and drying.