Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- LD 830 can be used for primary dielectric insulation of telephone, coaxial, control, power and other cables.
- Processing Guidelines
- LD 830 provides excellent surface finish and higher output rates over a broad range of conditions. A range of extrusion temperature in processing condition is 180~220 ℃.
- LD 830 provides excellent surface finish and higher output rates over a broad range of conditions. A range of extrusion temperature in processing condition is 180~220 ℃.
Properties
- Physical Form
- Physical Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Melt Index | 2 | g/10min | ASTM D1238 |
Hardness (1 sec.) | 52 | Shore D | ASTM D2240 |
Density | 0.921 | g/cm3 | ASTM D1505 |
Tensile Strength | min. 120 | kg/cm2 | ASTM D638 |
Elongation | min. 600 | % | ASTM D638 |
Low Temperature Brittleness | max. -76 | ˚C | ASTM D746 |
Hardness (1 sec) | 52 | Shore D | ASTM D2240 |
Value | Units | Test Method / Conditions | |
Dielectric Constant at 1 MHz | max. 2.3 | — | ASTM D150 |
Dissipation Factor at 1 MHz | max. 0.0005 | — | ASTM D150 |
Dielectric Strength (E0) | min. 20 | kV/mm | ASTM D149 |
DC Volume Resistivity | min. 10^16 | Ohm-cm | ASTM D257 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Systems
- Hanwha maintains a quality management system according to ISO 9001. This system provides traceability of individual batches and their production. If process is changed in a way that suspected to change the properties of the product, Hanwha will provide adequate information to the customer.
- Certificate
Based on quality inspection data at production, Hanwha supplies an inspection certificate for each batch. The certificate contains:
Product name
Batch number
Production date
etc.
Storage & Handling
- Storage
- The material should be stored indoors (15~25 ℃) in closed original packages in clean and dry environment. It is recommended that the using of the product on a first-in, first-out basis be established. Then recommended storage time at customer should not exceed 1 year.