Products

WWT 111 is an emulsion form of a high molecular weight cationic polyacrylamide, which is commonly used as a flocculant in various municipal and industrial wastewater treatment applications. Its effectiveness has been proven in liquid/solids separation systems, including clarification and dewatering.

T-Det® EPO 81 is an anhydrous, liquid nonionic surface-active agent produced by the reaction of ethylene oxide and propylene oxide. It is used in petroleum paper manufacture, water treatment, foam control, and agricultural chemicals. Due to its nonionic structure, T-Det® EPO 81 is compatible with anionic and cationic surfactants and is stable in the presence of acids, bases, and salts.

WWT 3640C is a medium-molecular-weight cationic polyacrylamide in emulsion form. It is used as a flocculant in a variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

T-Det® CAM 7.5 is an ethoxylated product based on cocoamine. It is primarily used as a nonionic surfactant in various industrial and domestic formulations. It is also used as a cleaning agent, antistatic agent, dispersant, emulsifier in textile formulations, corrosion inhibitor in metals, etc.

H-PAC® 3013 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

H-Quest® L-50 LA Sodium glucoheptonate has many industrial uses as a high performance chelating agent. Its superior performance in the pH range between 9 and 14 is due to its efficiency in forming stable chelates with di- and tri-valent metal ions such as Ca+2, Mg+2, Fe+2, Fe+3, Zn+2, Al+3, etc.

WWT 1082 is a high charge, high molecular weight anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, and has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

PWT 4300 is a low-charge, high-molecular-weight, anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

T-Mulz® HODE is a paraffinic oil emulsifier used in dormant oil sprays applied to orchard crops and as a component in lipophilic pesticide blends. It is OMRI-listed and can be used in organic crop production.

H-PAC® 8323S is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

T-Det® A 25-7 is a non-ionic surfactant ideal for laundry applications. For best results, it is recommended to use T-Det® A 25-7 in conjunction with T-Det® A 25-3 to formulate a broad-spectrum cleaner. The 25-series ethoxylates provide excellent emulsification properties and help prevent soil redeposition during the cleaning process.

PWT 4812 RS is a low-charge, very high-molecular-weight anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

T-Det® A 139 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 9 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants, and it is stable in the presence of acids, bases, and salts.

PWT 3140 is a medium charge, medium molecular weight cationic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, and has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

T-Mulz® 734-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural and industrial formulations. This product is an excellent emulsifier for a wide range of solvents. It is particularly good as a solvent emulsifier when hard water is the main problem.

T-Det® A 91-2.5 is a clear to hazy liquid surface-active agent that is anhydrous and produced by the reaction of an alcohol with 2.5 moles of ethylene oxide. The product has a hydroxyl value and is a liquid surfactant blend based on alcohol ethoxylates and alkyl phenol ethoxylates. T-Det® A 91-2.5 is a versatile emulsifier, wetting agent, and detergent used in a variety of industrial applications, including petroleum products, textiles, and cleaning.

H-Quest® B-95 Sodium glucoheptonate has many industrial uses as a high-performance chelating agent. Its superior performance in the pH range between 9 and 14 is due to its efficiency in forming stable chelates with divalent and trivalent metal ions, such as Ca2+, Mg2+, Fe2+, Fe3+, Zn2+, Al3+, and others

H-Quest® L-50 CS is an innovative reaction containing sodium glucoheptonate and other proprietary compounds to provide superior performance for use in industrial and agricultural applications. It provides exceptional properties in the pH range between 9 and 13 due to its efficiency in binding with divalent and trivalent metal ions such as Ca+2, Mg+2, Fe+2, Fe+3, Zn+2, Al+3, etc.

H-Quest CGH has many industrial uses, such as formulating cement retarders, acting as a dispersant for concrete particles, producing a permanent increase in the cement volume, increasing compressive strength, increasing plasticity, and inhibiting corrosion of the metal used in reinforced concrete.

H-PAC® 3011 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

T-Det® LF 505 is a low-foaming nonionic surfactant that is soluble in water at temperatures below its cloud point. Additionally, it is soluble in polar solvents such as alcohols and glycol ethers, as well as in aromatic solvents like xylene, toluene, and benzene. It is designed for low-foaming applications such as rinse aids, metal cleaners, cold phosphate cleaners, and hard surface cleaners.

T-Mulz® WAM is a blend of surfactants designed to increase the penetration of water and other nutrients into hard-to-wet soils. It eliminates localized dry spots and can increase plant growth in all types of media. The usage rates depend on local water hardness and are generally 3 - 4 ounces per gallon of water.

T-Mulz® 786-1 is a phosphate ester that is designed primarily for making emulsifier systems for metal processing, solvent cleaners, and dry cleaning. This non-hazardous surfactant has good dispersion properties and good solubility. It is soluble in perchloroethylene, xylene, ethanol, and kerosene and is readily dispersible in water.

H-Sil® EM 1060 is a 60% active, nonionic emulsion of 10,000 cSt polydimethylsiloxane. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is effective as a release agent for rubber, plastic, and shell metals in foundry applications. This product has additional applications in leather care, textiles, surface lubrication, surface protection, and gloss improvement.

T-Mulz® 598 is a blended anionic surfactant used in the production of emulsifier systems for agricultural and industrial applications. This product improves wetting and has good compatibility and emulsifying properties. It is a clear to yellow liquid that is compatible with both anionic and nonionic surfactants.

WWT 8400 Y is a structured, medium-molecular-weight cationic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering. It is well-suited for very high-shear applications such as rotary presses, screw presses, and centrifuges.

T-Det® N 7 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 7 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® DD 5 is an anhydrous, liquid nonionic surface-active agent produced by the reaction of dodecyl phenol with 5 moles of ethylene oxide. It is compatible with anionic and cationic surfactants and is stable in the presence of acids, bases, and salts.

T-Mulz® 1183 is a complex, ester-free organic phosphate acid that is compatible with anionic and nonionic surfactants. As potentially explosive mixtures are formed when concentrated oxidizing or reducing agents are mixed with organic compounds, T-Mulz® 1183 should not be mixed with these compounds. This product is recommended for use in emulsion polymerization.

H-Sil® SDF 10,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

WWT 1082F is a high charge, high molecular weight anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, such as liquid/solids separation systems, including clarification and dewatering.

H-Sil® SC-C8 is a high-molecular-weight silicone polyether that imparts low surface tension to formulated products. It helps promote wetting and surface activity and is an effective additive to both cosmetic formulations and household products. This product is stable in most formulations when used up to 5% and is an excellent co-surfactant for use in hair-care shampoos and conditioners. In skin care products, it is an effective emollient and humectant.

T-Det® A 1312 is a non-ionic surfactant that is produced through the reaction of iso-tridecyl alcohol with 12 moles of ethylene oxide. This product can be used in a variety of applications, including textiles, metal degreasing, and household cleaners, due to its ability to penetrate, wet, solubilize, disperse, and emulsify effectively.

T-Det® A 91-8 is an anhydrous liquid surface-active agent produced by the reaction of an alcohol with 8 moles of ethylene oxide. This product is useful in many applications, such as textile processing, metal degreasing, clay soils, fire fighting, and industrial, institutional, and household cleaners. It is considered a great detergent due to its superb ability to penetrate, wet, solubilize, disperse, and emulsify.

WWT 3041 is a structured, very high molecular weight cationic polyacrylamide in emulsion form, used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering through rotary presses, screw presses and centrifuges.

T-Det® A 267-9 is a biodegradable, 7-mole ethoxylate of a linear C12-C16 alcohol with 90% active content. It has exceptional detergent properties and can be used in various cleaning formulations. This product appears as a clear liquid at room temperature.