company tower banner
HELM Agro Company Logo

HELM Agro Zone Maxx

Zone Maxx is a dual-action herbicide for burndown and long-lasting residual. It provides top-quality crop safety in an optimized premix for maximum effectiveness on small-seeded broadleaves plus greater freedom and flexibility in crop rotation.

Functions: Herbicide

HRAC/WSSA Group: 14, 2

Application Technique: Pre-Emergence

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

HRAC/WSSA Group
Agrochemical Functions
Technologies
Ingredients

Active Ingredients (% By WT):

  • Sulfentrazone - 62.2%
  • Chlorimuron Ethyl - 3.9%

Other Ingredients: 33.9%

Total: 100.0%

Zone Maxx HERBICIDE contains 0.62 lb of sulfentrazone and 0.04 lb of chlorimuron ethyl per pound of product

Applications & Uses

Application Technique
Directions for Use

Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area at the time of application. 

Properties

Physical Form

Safety & Health

Personal Protective Equipment

Applicators and other handlers must wear:

  • Long-sleeved shirt, long pants
  • Protective eyewear
  • Shoes plus socks
  • Chemical-resistant gloves made of Barrier laminate, Butyl rubber ≥ 14 mils, Nitrile rubber ≥ 14 mils, Neoprene rubber ≥ 14 mils, Natural rubber ≥ 14 mils, Polyvinyl chloride ≥ 14 mils or Viton ≥ 14 mils

Follow the manufacturer’s label instructions for cleaning/maintaining PPE. In the event there are no instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.

User Safety Recommendations

Users Should:

  • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
  • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing
Environmental Hazards

This pesticide is toxic to marine/estuarine invertebrates. Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. Drift and runoff may be hazardous to terrestrial and aquatic plants in neighboring areas. Do not contaminate water when disposing of equipment washwaters or rinsate.

Surface Water Advisory: This product may impact surface water quality due to runoff of rain water. This is especially true for poorly draining soils and soils with shallow ground water. This product is classified as having high potential for reaching surface water via runoff for several months or more after application. A level, well-maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, streams, and springs will reduce the potential loading of chlorimuron-ethyl from runoff water and sediment. Runoff of this product will be greatly reduced by avoiding applications when rainfall or irrigation is expected to occur within 48 hours.

Ground Water Advisory: Sulfentrazone is known to leach through soil into groundwater under certain conditions as a result of label use. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Do not use on coarse soils classified as sand which have less than 1% organic matter. Chlorimuron-ethyl is known to leach through soil into groundwater under certain conditions as a result of label use. This chemical may leach into groundwater if used in areas where soils are permeable, particularly where the water table is shallow.

Runoff Prevention
To protect the environment, do not allow pesticide to enter or run off into storm drains, drainage ditches, gutters or surface waters. Applying this product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area. Rinsing application equipment over the treated area will help avoid run off to water bodies or drainage systems.

Windblown Soil Particles
Understanding the risks associated with the application of Zone Maxx Herbicide essential to aid in preventing off-site injury to desirable vegetation and agricultural crops. The risk of off-site movement both during and after application may be affected by a number of site specific factors such as the nature, texture and stability of the soil, the intensity and direction of prevailing winds, vegetative cover, site slope, rainfall, drainage patterns, and other local physical and environmental conditions. A careful evaluation of the potential for off-site movement from the intended application site, including movement of treated soil by wind or water erosion, must be made prior to using Zone Maxx Herbicide. This evaluation is particularly critical where desirable vegetation or crops are grown on neighboring land for which the use of Zone Maxx Herbicide is not labeled. If prevailing local conditions may be expected to result in off-site movement and cause damage to neighboring desirable vegetation or agricultural crops, do not apply Zone Maxx Herbicide

Storage & Handling

Storage and Disposal

Do not contaminate water, food or feed by storage or disposal or cleaning of equipment.

Pesticide Storage
Store product in original container only. Keep container closed when not in use, away from food or feed, fertilizer and other pesticides. Store in a cool dry place and avoid excess heat. Do not store below 30°F degrees.

Pesticide Disposal
Wastes resulting from the use of this product that cannot be used must be disposed of in a landfill approved for pesticide disposal or in accordance with applicable Federal, State or local procedures. For more information contact your State Pesticide or Environmental Control Agency or the Hazardous Waste representative of the nearest EPA Regional Office for guidance.

Container Disposal
Nonrefillable container - Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: (For containers 50 pounds or less) Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into begins to drip. Repeat this procedure two more times. Then offer for recycling if available, or reconditioning, or puncture and dispose of in a sanitary landfill, or incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.

Returnable/Refillable Containers - Refill this container with Zone Maxx Herbicide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents into application equipment or mix tank. Fill the container about 10% full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by other procedures approved by State and local authorities.