Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Production
HIGH DENSITY POLYETHYLENE - HIPLEX® It is produced in the HIP-Petrohemija under the license from Phillips Petroleum Co (USA) and engineering made by Crawford & Russell (USA).
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Recycling
Polyethylene is a material suitable for recycling. The waste, that could appear during processing, should be kept clean before new usage through direct recycling.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Melt Flow Rate (190°C / 2.16 kg) | 0.2 | g/10 min | EN ISO 1133-1 |
| Density | 951 | kg/m3 | EN ISO 1183-2 |
| Tensile Strength at Yield | 30 | MPa | EN ISO 527-3 ,EN ISO 527-2 |
| Tensile Strength at Break | 24 | MPa | EN ISO 527-3 ,EN ISO 527-2 |
| Elongation | 800 | % | EN ISO 527-3 ,EN ISO 527-2 |
| Izod Impact Strength | 100 | kJ/m2 | EN ISO 180 |
| Hardness | 64 | Shore D | EN ISO 868 |
| ESC Resistance | min. 100 | h | EN ISO 22088-3 method B ,ASTM D 1693 |
Regulatory & Compliance
- Certifications & Compliance
- Certifications
All HIPLEX® types have Health Certificate ie Statement of Conformity, which declares product’s conformity with the European norms for materials intended to come into contact with foodstuffs. Statement of Conformity is issued by National Laboratory of Health, Environment and Food, Maribor, Slovenia.
- REACH
HIP-Petrohemija with applying the existing standards ISO 9001, ISO 14001 ISO 45001 and ISO 50001 follows completely the highest standards by which human health and safety protection and environmental protection are regulated and herewith it expresses its intention to meet all the requirements which are prescribed by REACH regulation. Registration of all the substances of potential export interest has been made with European Agency for Chemicals in Helsinki, in accordance with the prescribed deadlines, therefore in this way it enables undisturbed placement and sale of HIP-Petrohemija’s products without any limits at EU Market. As the Only Representative for HIP-Petrohemija in EU, according to Article 8 of REACH regulation, ReachLaw Ltd, Helsinki, Finland has been designated.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage
Polymer pellets are packed in classical or valve bags, each bag weighs 25 kg. Bags are arranged on pallets and wrapped with stretch-hood foil. One pallet has total polymer weight of 1250 kg. Polyethylene is combustible material, therefore fire prevention measures in warehouses should be applied. Keep the polymer protected from harmful influence of heat, direct sunlight and high atmospheric humidity during storage. If resin is stored under unfavorable conditions of large fluctuation in ambient temperature and atmospheric humidity, atmospheric moisture can condense inside the packaging. In such case, it is recommended to dry pellets before use. The producer has no responsibility for any damage caused with the inappropriate storage.