Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Benefits
- Can Be Cross Linked with 8000 Polyurethane Converter
- Excellent Resistance to U.V. Exposure
- Extremely Durable
- Good Abrasion Resistance
- Resists Chipping
- Uniform Appearance as a Topcoat whether Spray, Brush, or Roll Application
- Excellent Color Retention and Chalk Resistance
- Excellent Brushing Characteristics
- High Hiding
- Easy to Apply
- Brush, Roll, or Spray Application
Applications & Uses
- Applications
- Application Area
- Uses
Substrates include interior and exterior applications on walls, ceilings, woodwork, and drywall, as well as O.E.M. farm machinery, feed and grain bins, livestock equipment, structural steel, tanks, trailers, and general industrial finishing where dry time is not a factor.
- Surface Preparation
All substrates must be cleaned free of dust, dirt, oil (including form oils & parting compounds), grease soap residue, wax and flaking paint. Sandblast or wire-brush rusty surfaces and prime with 82 Series Primers. For fast drying, spray applications only, use 92 Series Primers. Refer to Surface Preparation Guide for more detailed instructions.
- Applications
- Mixing: Hand stir each container thoroughly before using and occasionally while applying. No thinning usually required. If necessary, thin sparingly with mineral spirits.
- Application: Apply using a high quality brush, roller or paint pad. For airless application, use a 0.011-0.015”(0.28-0.38mm) tip. For air spray use 50 psi (3.52 Kg/cm2) air pressure and 8 psi (0.56 Kg/cm2) fluid pressure with conventional air cap, tip and needle. When using #8000 Polyurethane Converter, the material will have a pot life of 24 hours.
- Coverage: One gallon will cover approximately 400 square feet per coat on smooth surfaces. Coverage figure does not include spray loss, loss due to surface porosity, surface irregularities, nor material loss when mixing.
- Cleanup: Clean spills, spatters, hands, tools and other equipment promptly with mineral spirits. Dispose of used paint and waste in accordance with local, state, and federal regulations. Follow manufacturer’s safety recommendations when using mineral spirits.
- Application Precautions & Limitations: Apply when surface, air and product are above 40°F (4°C) and at least 5°F (3°C) above the dew point.
Properties
- Color