Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Properties
Epoxy coatings based on Merginamid A 160 exhibit outstanding properties which are:
- Excellent adhesion on mineral and metallic substrates
- Unobjectionable and tack-free hardening even on damp surfaces
- High water resistance
- Good chemical resistance, especially against alkali
- Good gloss retention till the end of the potlife
- Low smell
- Not inflammable and ecologically beneficial due to the absence of solvents
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Coating Type
- Application
Merginamid A 160 is an emulsifying epoxy hardener especially suited for the formulation of aqueous coatings for corrosion protection on mineral and metallic substrates.
Properties
- Typical Properties
- Typical Parameters
Use level [g/100g] 110 (1) 23 (2) Gel time 250g at 23°C Ca. 2.5 h (1) Min. 6 h (2) Biobased carbon content (3) [%] 34 (1) Liquid epoxy resins, epoxy equivalent weight approx. 190 g/Eq
(2) Dispersion of a solid epoxy resin (56 %), epoxy equivalent weight approx. 890 g/Eq
(3) Measure of the amount of biomass-derived carbon in a product compared to its total carbon content
Value | Units | Test Method / Conditions | |
Amine Value | 135 - 155 | mg KOH/g | — |
Color | Max. 12 | Gardner | — |
Density (20°C) | 1.0 | g/cm3 | — |
Flash Point | Min. 112 | °C | — |
H-Active-Equivalent | Ca. 210 | g/Eg | — |
Solids Content | 49 - 51 | % | — |
Solvent | Water | — | — |
Viscosity (25°C) | 30 000 - 50 000 | mPa.s | — |