O/W Skin Cream with Jojoba Oil 10.4
Formulation
| Name | Ingredient | Supplier | % |
|---|---|---|---|
| Phase A | |||
HYDRIOL® PGLO.4 (Polyglyceryl-4 Oleate) | (Polyglyceryl-4 Oleate) | — | 1.5 |
HYDRIOSUL® HRN.100 (Sulfated Castor Oil) | (Sulfated Castor Oil) | — | 1.5 |
Caprylic/Capric Triglyceride (Caprylic/Capric Triglyceride) | (Caprylic/Capric Triglyceride) | — | 8.0 |
Glyceryl Stearate (Glyceryl Stearate) | (Glyceryl Stearate) | — | 6.0 |
Salim® FA 68/50P Cetearyl Alcohol) | Cetearyl Alcohol) | — | 1.5 |
PCL-Liquid® (Cetearyl Ethylhexanoate (and) Isopropyl Myristate) | (Cetearyl Ethylhexanoate (and) Isopropyl Myristate) | — | 7.0 |
Jojoba oil (Simmondsia Chinensis (Jojoba) Seed Oil) | (Simmondsia Chinensis (Jojoba) Seed Oil) | — | 7.0 |
Decyl oleate (Decyl Oleate) | (Decyl Oleate) | — | 7.5 |
| Phase B | |||
Urea (Urea) | (Urea) | — | 2.0 |
Rhodicare® T (Xanthan Gum) | (Xanthan Gum) | — | 0.60 |
Water (Water) | (Water) | — | 57.2 |
Perfume "Nature" PO225388 (Parfum) | (Parfum) | — | 0.20 |
Preservative - | - | — | - |
Preparation:
Weight in all ingredients for the oil phase according the sequence above and heat the mixture
up to 80 °C during stirring. Add the mixture to the aqueous phase without stirring at 70 - 80 °C.
Stir shortly at 70 °C and homogenize for 3 minutes with a rotor / stator system at approx. 10'000
rpm. Cool down to 25 °C and add the perfume. Homogenize again for 1 - 2 minutes with the
rotor / stator system.
Remark: Add Rhodicare® T after preparing the aqueous phase under strong stirring until the
mixture is homogeneous. Remove the air with vacuum if possible.
Notes:
Properties
This unique formulation is quickly absorbed and leaves a skin feeling sensationally soft and
supple.
- Markets
- Applications
- Application Format
- Skin Care Applications
