IB Roof Systems IB Rapid Set Insulation Adhesive

Identification & Functionality

Product Type

Insulation Adhesive

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Adhesives & Sealants

Other Adhesives & Sealants

Features & Benefits

Ready-to-Use Product Features

Excellent Substrate Adhesion,

Fast Setting,

Good Bonding Strength

Features

• Easy to apply, no mixing
• Non-penetrating attachment system
• Rapid Application
• Saves Labor

Applications & Uses

Markets

Building & Construction

Applications

Building & Construction — Building Envelope & Roofing

EIFS & Insulation

Building & Construction — Building Materials

Wood

Compatible Substrates & Surfaces

Concrete,

Wood

Application

Refer to IB Specifi cations and Construction Details for additional installation instructions. PG-1 adhesive can be used to install IB roof insulation and cover boards over approved dry, clean substrates. Installation over existing smooth or gravel surfaced asphalt roofs (gravel removed) requires additional preparation.

Coverage

Approximately 400-600 sq. ft. per case (1/2” - 3/4” widebeads @ 12” o.c. rows)

Substrates¹

• Structural concrete
• Gypsum
• Lightweight Insulating Concrete
• Cementitious wood fi ber
• Plywood
• Smooth surfaced BUR (weathered)
• Smooth and Granular surface SBS Modifi ed Bitumen
• Granular APP Modifi ed Bitumen

1 Substrates and all surfaces must be clean, dry and free of dirt, dust, debris, oils, loose and/or embedded gravel. IB Roof Systems recommends insulation adhesion pull tests in accordance with ANSI/SPRI IA-1 prior to beginning work to confi rm acceptable uplift resistance.

Limitations

• All surfaces to be bonded must be clean, dry and free of any debris and smooth with no surface contamination
• Not recommended for use with insulation boards larger than 4’x4’
• Do not use warped or curled insulation boards. All insulation boards must lay fl at upon the roof surface Not recommended for use over Coal Tar roofs
• Not recommended for fl eeceback membranes
• Millenium Universal Primer required over prepared (spudded or swept) gravel surfaced asphalt BUR, or smooth / granulated BUR or modifi ed bitumen membranes.
• Millenium Surface Treatment primer required over non-oxidized (fresh / glazed) asphalt or smooth APP membranes.

Regulatory & Compliance

Approvals

Underwriters Laboratories, FM Approvals, ICC/ES, Miami-Dade County and Florida Building Code Product Approvals

Packaging & Availability

Packaging Type

Cartridges

Packaging

• 4-1.5L Cartridges per case
• 18 lbs per case

Storage & Handling

Storage

• Store between 45°F and 95°F. Protect from freezing
• Product temperature prior to application: 65° - 85°F