Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
Properties
- Color
- Coverage
approximately 60 sq. ft. per gallon applied toboth the substrate and underside of the membrane sheet. Coverage may vary depending on job site conditions and
the type of substrate to which you are applying as well asclimatic conditions.
Packaging & Availability
- Packaging
1 Container = 5 U.S. Gallons
- Weight
55 lbs. (11 lbs. per U.S. Gallon)
- Installation
Stir adhesive thoroughly before use. Apply IB Vertibond Adhesive as contact adhesive to both the underside of the membrane and to installed insulation, horizontal and vertical substrates at the approximate rate of one gallon per 60 square feet of net applied coverage area (1/2 gal. to each surface) in smooth, even coatings with no bare areas, globs or puddles. Allow the adhesive on the substrate to dry completely. Apply adhesive to underside of membrane sheets in manageable lengths and set while tacky to the touch. Roll membrane with a vinyl roller to make positive contact with substrate and to remove any air bubbles. IB Vertibond Adhesive should be applied at temperatures of 40° F or above to a structurally sound substrate that is clean, dry, free of frost, oils, soaps, silicone, or loose material that may inhibit bonding.. Applying IB Vertibond Adhesive below 40° F will extend curing time and may compromise its effectiveness.
Storage & Handling
- Storage
When IB Vertibond Adhesive is stored indoors out of directsunlight and in the original, unopened container between 60° F and 80° F, the approximate shelf life is 6 months.Always rotate stock.