Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Installation
IB Water Borne Adhesive should be applied only to the installed insulation or horizontal field of roof substrate at the approximate rate of one gallon per 160 square feet. Stir adhesive thoroughly before use. Membrane sheet should be set immediately into wet adhesive. Roll membrane with a vinyl roller to make positive contact with substrate and to remove any air bubbles. IB Water Borne Adhesive should be applied to a structurally sound substrate that is clean, dry, free of frost, oils, soaps, silicone, or loose material that may inhibit bonding. IB Water Borne Adhesive should be applied at temperatures of 40°F and rising. Do not apply adhesive if there is a possibility of freezing temperatures within 24 hours of application.
- Coverage
Coverage varies greatly depending on job site conditions and the substrate to which you are applying. Coveragerange is between 300 (using a 3/8” nap roller skin) to 525
(using a commercial grade sprayer) square feet per 3gallon pail. Contact IB for additional application/coveragerates and recommendations.
Properties
- Color
Packaging & Availability
- Packaging
1 Container – 3 U.S. Gallons
- Weight
45 lbs. (15 lbs. per U.S. Gallon)
Storage & Handling
- Storage
When IB Water Borne Adhesive is stored indoors out ofdirect sunlight and in the original, unopened container between 60°F and 80°F, the approximate shelf life is12 months. Always rotate stock. DO NOT ALLOW TOFREEZE. Once frozen, the IB Water Borne will not returnto its original state, and is no longer usable.