Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Adhesive & Sealant Type
- Applications
RELEASE PP 25 W anchors well to polyester and treated polyolefins. It provides an excellent release effect on coextruded films or hot-melt coated polyolefines/PET.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
pH | 7 - 9 | — | — |
Total Solids | 25±2 | % | — |
Brookfield Viscosity 25°C | 20 - 601 | mPa.s | — |
Packaging & Availability
- Packaging Type
- Packaging and Storing
Packaging
The product is supplied in plastic drums (50 kg); IBC containers (1000 kg).
Storing
Product must be stored at temperatures between +5 and 30°C. Use within 9 months from production date (unopened and in the original packaging).
Storage & Handling
- Shelf Life
- 9 Months
- Handling
RELEASE PP 25 W can be used by simple dilution with deionized water to a total solids concentration of 1 - 1.5%. To be applied by Meyer Bar or Gravure rolls 4 - 5 g/sqm on corona treated BOPP films (approx. 35 dyne/cm).
Release action is developed by evaporation of the water at 80 - 100°C, depending upon web speed and oven efficiency.
HNo curing mechanism is involved. This product may also be used to modify waterborne ink having good gloss, release power and a low coefficient of friction.