Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Adhesive & Sealant Type
- Applications
RELEASE W 40 G2 is recommended for hot-melt and solvent borne adhesives. The product has been designed as release agent for porous substrates, like Kraft paper. It grants excellent release and unwinding properties.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Solvents | water | — | — |
pH | 8 - 10 | — | — |
Total Solids | 39±1 | % | — |
Brookfield Viscosity 25°C | 150 - 4501 | mPa.s | — |
Packaging & Availability
- Packaging Type
- Packaging and Storing
Packaging
The product is supplied in iron drums (200 kg); IBC containers (1000 kg).
Storing
Keep material at temperatures between +5°C and +40°C, avoid direct sunlight/freezing. When stored for over one month, the product should be stirred slowly for 10 - 15 minutes before use. Use within 9 months from production date (unopened and in the original packaging).
Storage & Handling
- Shelf Life
- 9 Months
- Handling
Quantity to apply: it depends upon substrate porosity: usually from 1 to 3 g dry/sqm.
Methods: Mayer bar, Reverse Roll, Roto gravure, Air knife. It can be either thickened (acrylic thickeners) or diluted (water). It is advised to heat the product for a few seconds at 150°C in order to achieve the highest release properties (a self-curing process takes place).
Aging properties are excellent.