Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Adhesive & Sealant Type
- Applications
RELEASE W 45 GB5 has a controlled release power: it has been developed for hot-melt adhesives. It can be used on porous substrates, like saturated Kraft paper for masking tapes.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
pH | 8 - 9 | — | — |
Brookfield Viscosity 25°C | 500 - 1,5001 | mPa.s | — |
Total Solids | 45±1 | % | — |
Packaging & Availability
- Packaging Type
- Packaging and Storing
Packaging
The product is supplied in iron drums (200 kg); IBC containers (1000 kg).
Storing
Keep material at temperatures between +5°C and +40°C, avoid direct sunlight/freezing. When stored for over one month, it is necessary to stir slowly the product for 10 - 15 minutes before use. Use within 9 months from production date (unopened and in the original packaging).
Storage & Handling
- Shelf Life
- 9 Months
- Handling
The quantity to apply depends upon the substrate porosity, usually from 1 to 3 g dry/sqm. Methods: Mayer bar, Reverse Roll, Roto gravure, Air knife. It can be either thickened (acrylic thickeners) or diluted (water). We recommend heating the product for a few seconds at 150°C during drying to activate a self-curing process that will achieve the highest release power. Aging properties are excellent.