Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Flame Rating
- UL 94 V2
- Appearance
- Translucent
- Physical Properties
- Thermal Properties
- Optical Properties
- Flammability
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Melt Volume Flow Rate - MVR (300°C/1.20kg) | 13 | cm3/10min | ISO 1133 (JIS K7210) |
| Mold Shrinkage - MD (2 mm) | 0.6 - 0.8 | % | Idemitsu Method |
| Mold Shrinkage - TD (2 mm) | 0.6 - 0.8 | % | Idemitsu Method |
| Water Absorption (24h, 50% RH) | 0.2 | % | ISO 62 |
| Density | 1.18 | g/cm3 | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Linear Thermal Expansion Coefficient (0.45 MPa) | 138 | °C | ISO 75-1,2 (JIS K7191-1,2) |
| Linear Thermal Expansion Coefficient (1.8 MPa) | 123 | °C | ISO 75-1,2 (JIS K7191-1,2) |
| Deflection Temperature Under Load | 7 | ×10-5/°C | ISO 11359-2 |
| Value | Units | Test Method / Conditions | |
| Total Luminous Transmittance | 73 | % | ISO 13468-1 (JIS K7361-1) |
| Value | Units | Test Method / Conditions | |
| Flammability Rating (0.5-3.0 mm) | V2 | Class | UL 94 |
| Value | Units | Test Method / Conditions | |
| Pre-drying Timings | 5.0 - 8 | h | — |
| Pre-drying Temperature | 120 | °C | — |
| Cylinder Temperature | 270 - 310 | °C | — |
| Mold Temperature | 80 - 110 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability