Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Parameters
Value | Units | Test Method / Conditions | |
Mold Shrinkage - Cross Flow | 0.3 - 0.6 | % | Idemitsu Method |
Mold Shrinkage - Flow | 0.2 - 0.4 | % | Idemitsu Method |
Water Absorption (24h, 50% RH) | 0.19 | % | ISO 62 |
Density | 1.35 | g/cm3 | ISO 1183/A |
Glass Content | 30 | wt% | — |
Value | Units | Test Method / Conditions | |
Linear Thermal Expansion Coefficient - Cross Flow (-30°C) | 43 | x10-6mm/mm/°C | TMA |
Linear Thermal Expansion Coefficient - Flow (-30°C) | 23 | x10-6mm/mm/°C | TMA |
Deflection Temperature Under Load (1.8 MPa) | 245 | — | ISO 75 A |
Deflection Temperature Under Load (0.45 MPa) | 260 | — | ISO 75 B |
Value | Units | Test Method / Conditions | |
Arc Resistance | 5 | PLC level | ASTM D495 |
Comparative Tracking Index - CTI | 1 | PLC level | IEC 60112 Solution A |
Dielectric Constant (1 MHz) | 3.3 | - | ASTM D 150 |
Dissipation Factor (1 MHz) | 0.034 | - | ASTM D 150 |
RTI Mechanical with Impact (Imp) | 50 | °C | UL 746B |
RTI Mechanical Without Impact (Str) | 50 | °C | UL 746B |
Dielectric Strength | 22 | kV/mm | IEC 60243 |
RTI Elec | 50 | °C | UL 746B |
Volume Resistivity | 7.4e+15 | Ohm.cm | IEC 60093 |
Value | Units | Test Method / Conditions | |
High Ampere Arc Resistance - HAI (1.5 mm) | 0 | PLC level | UL 746A |
High Ampere Arc Resistance - HAI (3.0 mm) | 0 | PLC level | UL 746A |
Flammability | 1.5 | mm | UL 94 |
Hot Wire Ignition - HWI (1.5 mm) | 4 | PLC level | UL 746A |
Hot Wire Ignition - HWI (3.0 mm) | 4 | PLC level | UL 746A |
Value | Units | Test Method / Conditions | |
Pre-drying Timings | 3.0 - 5 | h | — |
Melt Temperature | 280 - 310 | °C | — |
Pre-drying Temperature | 80 | °C | — |
Mold Temperature | 50 - 80 | °C | — |
Packaging & Availability
- Country Availability
- Regional Availability