Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Flame Rating
- UL 94 HB
- Physical Properties
- Thermal Properties
- Electrical Properties
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Mold Shrinkage - Cross Flow (-30°C) | 75 | x10-6mm/mm/°C | TMA |
| Mold Shrinkage - Flow (-30°C) | 22 | x10-6mm/mm/°C | TMA |
| Water Absorption (24h, 50% RH) | 0.01 | % | ISO 62 |
| Density | 1.14 | g/cm3 | ISO 1183/A |
| Glass Content | 17 | wt% | — |
| Value | Units | Test Method / Conditions | |
| Linear Thermal Expansion Coefficient - Cross Flow | 0.7 - 0.9 | % | Idemitsu Method |
| Linear Thermal Expansion Coefficient - Flow | 0.5 - 0.7 | % | Idemitsu Method |
| Deflection Temperature Under Load (1.8 MPa) | 188 | — | ISO 75 A |
| Deflection Temperature Under Load (0.45 MPa) | 260 | — | ISO 75 B |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant (1 MHz) | 2.8 | - | ASTM D 150 |
| Dissipation Factor (1 MHz) | 0.0006 | - | ASTM D 150 |
| Volume Resistivity | min. 1E+16 | Ω·cm | ASTM D257 |
| Value | Units | Test Method / Conditions | |
| Pre-drying Timings | 3.0 - 5 | h | — |
| Pre-drying Temperature | 120 | °C | — |
| Mold Temperature | 130 - 155 | °C | — |
| Melt Temperature | 280 - 310 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability