Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Flame Rating
- UL 94 V0
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Mold Shrinkage - Flow (-30°C) | 18 | x10-6mm/mm/°C | TMA |
| Mold Shrinkage - Cross Flow (-30°C) | 38 | x10-6mm/mm/°C | TMA |
| Water Absorption (24h, 50% RH) | 0.02 | % | ISO 62 |
| Density | 1.45 | g/cm3 | STANDARD ISO 1183 |
| Glass Content | 30 | wt% | — |
| Value | Units | Test Method / Conditions | |
| Linear Thermal Expansion Coefficient - Cross Flow | 0.3–0.7 | % | Idemitsu Method |
| Linear Thermal Expansion Coefficient - Flow | 0.1–0.4 | % | Idemitsu Method |
| Deflection Temperature Under Load (1.8 MPa) | 230 | — | ISO 75 A |
| Deflection Temperature Under Load (0.45 MPa) | 265 | — | ISO 75 B |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant (1 MHz) | 3.1 | - | ASTM D 150 |
| Dissipation Factor (1 MHz) | 0.003 | - | ASTM D 150 |
| RTI Mechanical with Impact (Imp) | 50 | °C | UL 746B |
| RTI Mechanical Without Impact (Str) | 50 | °C | UL 746B |
| Dielectric Strength | 35 | kV/mm | IEC 60243-1 |
| RTI Elec | 50 | °C | UL 746B |
| Volume Resistivity | min. 1E+16 | Ω·cm | ASTM D257 |
| Value | Units | Test Method / Conditions | |
| Flammability (0.8 mm) | V0 | -- | UL – 94 |
| Value | Units | Test Method / Conditions | |
| Pre-drying Timings | 3.0 - 5 | h | — |
| Pre-drying Temperature | 120 | °C | — |
| Mold Temperature | 130 - 155 | °C | — |
| Melt Temperature | 280 - 310 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability