Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Mold Shrinkage - Cross Flow | 0.3 - 0.7 | % | Idemitsu Method |
| Mold Shrinkage - Flow | 0.2 - 0.5 | % | Idemitsu Method |
| Water Absorption (24h, 50% RH) | 0.01 | % | ISO 62 |
| Density | 1.31 | g/cm3 | ISO 1183 |
| Glass Content | 15 | wt% | — |
| Value | Units | Test Method / Conditions | |
| Linear Thermal Expansion Coefficient - Cross Flow (-30°C) | 71 | x10-6mm/mm/°C | TMA |
| Linear Thermal Expansion Coefficient - Flow (-30°C) | 33 | x10-6mm/mm/°C | TMA |
| Deflection Temperature Under Load (1.8 MPa) | 175 | — | ISO 75 A |
| Deflection Temperature Under Load (0.45 MPa) | 255 | — | ISO 75 B |
| Value | Units | Test Method / Conditions | |
| Arc Resistance | 6 equivalent | PLC level | ASTM D495 |
| Comparative Tracking Index - CTI | 0 equivalent | PLC level | — |
| Dielectric Constant (1 MHz) | 3.1 | - | ASTM D 150 |
| Dissipation Factor (1 MHz) | max. 0.001 | — | IEC 60250 |
| RTI Mechanical with Impact (Imp) | 50 | °C | UL 746B |
| RTI Mechanical Without Impact (Str) | 50 | °C | UL 746B |
| Dielectric Strength | 50 | kV/mm | ASTM D149 |
| RTI Elec | 50 | °C | UL 746B |
| Volume Resistivity | min. 1E+16 | Ω·cm | ASTM D257 |
| Value | Units | Test Method / Conditions | |
| Flammability | 1.5 | mm | UL 94 |
| Value | Units | Test Method / Conditions | |
| Pre-drying Timings | 3.0 - 5 | h | — |
| Pre-drying Temperature | 120 | °C | — |
| Mold Temperature | 130 - 155 | °C | — |
| Melt Temperature | 280 - 310 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability