Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Flame Rating
- UL 94 HB
- Physical Properties
- Thermal Properties
- Electrical Properties
- Processing Parameters
Value | Units | Test Method / Conditions | |
Mold Shrinkage - Cross Flow | 0.3 - 0.7 | % | Idemitsu Method |
Mold Shrinkage - Flow | 0.1 - 0.4 | % | Idemitsu Method |
Water Absorption (24h, 50% RH) | 0.02 | % | ISO 62 |
Density | 1.41 | g/cm3 | ISO 1183 |
Glass Content | 30 | wt% | — |
Value | Units | Test Method / Conditions | |
Linear Thermal Expansion Coefficient - Cross Flow (-30°C) | 49 | x10-6mm/mm/°C | TMA |
Linear Thermal Expansion Coefficient - Flow (-30°C) | 22 | x10-6mm/mm/°C | TMA |
Deflection Temperature Under Load (1.8 MPa) | 230 | — | ISO 75 A |
Deflection Temperature Under Load (0.45 MPa) | 265 | — | ISO 75 B |
Value | Units | Test Method / Conditions | |
Arc Resistance | 6 equivalent | PLC level | ASTM D495 |
Comparative Tracking Index - CTI | 0 equivalent | PLC level | — |
Dielectric Constant (1 MHz) | 3.4 | - | ASTM D 150 |
Dissipation Factor (1 MHz) | max. 0.001 | — | IEC 60250 |
Dielectric Strength | 50 | kV/mm | ASTM D149 |
Volume Resistivity | min. 1E+16 | Ω·cm | ASTM D257 |
Value | Units | Test Method / Conditions | |
Pre-drying Timings | 3.0 - 5 | h | — |
Pre-drying Temperature | 120 | °C | — |
Mold Temperature | 130 - 155 | °C | — |
Melt Temperature | 280 - 310 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability