Products

PHOTOMER® 5850 is an amine modified polyether acrylate used in UV/EB curable systems. The product exhibits a low viscosity. It gives a high crosslinking density with a high reactivity.

PHOTOMER® 6630 is a di-functional aliphatic urethane acrylate oligomers.

PHOTOMER® 4306 is a high boiling point monomeric liquid with a relative low viscosity. PHOTOMER® 4306 is a tetra functional monomer which under exposure to ionizing radiation or added sources of free radicals undergoes polymerization.

PHOTOMER® 4094 (GPTA) is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent reactivity. Designed for UV/EB curable systems, it produces films of high crosslink density which are more flexible than those of first generation monomers such as TMPTA without sacrificing cure speed.

Photomer® 3016-20H is a low viscosity, non-volatile, difunctional epoxy acrylate oligomer derived from a lower molecular weight aromatic epoxy resin, which is then diluted with 20% Photomer® 4017 (HDDA). The product exhibits fast cure speed, low odor and low skin irritancy. It is an excellent film former and contributes toward unique performance properties typical of epoxy resins in UV/EB radiation curable formulations.

Omnirad CPTX is a highly efficient Type II photoinitiator which, used in combination with tertiary amine synergists to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. Omnirad CPTX may also be used as a sensitiser and in particurlarly iodonium salt in cationic cure.

PHOTOMER® 4812 is a mono functional acrylate monomer, used as flexibilizing agent in coatings and inks. It will also increase water resistance properties due to its hydrocarbon backbone.

PHOTOMER® 3319 is a low viscosity di functional aliphatic epoxy acrylate which exhibit of excellent reactivity and chemical resistance.

Photomer® 4172 (PPTTA) is a low odor aliphatic tetra functional acrylate of low viscosity and excellent crosslinking reactivity with very low levels of toluene.

PHOTOMER® 4226 TF (DPGDA)is a toluene free aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

PHOTOMER® 4149 TF is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

Omnirad 127 is a highly efficient Type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates – in combination with mono- or multifunctional monomers. Omnirad 127 is especially suitable for all types of pigmented UV inks (offset, screen, flexo and inkjet) and clear coatings, particularly in thin coatings (such as overprint varnishes) but also in a variety of coating applications.

PHOTOMER® 4046 is a proprietary acid mono functional monomer with medium viscosity. It exhibits excellent adhesion combined with hydrophobic characteristics when used in UV/EB cure laminating adhesives, coatings and inks formulations for various porous and non-porous substrates. It is tested to be non-corrosive.

Omnirad BL 724 is a photo initiator blend for curing pigmented systems for UV and UV LED Lamps at 365 - 385 nm.

PHOTOMER® 4226 (DPGDA) is an aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

PHOTOMER® 4050 is an aliphatic difunctional acrylate of low viscosity, low volatility, good flexibility and reactivity. It is an effective reactive diluent with good viscosity reducing and solvency characteristics for a wide range of radiation curable acrylated oligomers and prepolymers.

PHOTOMER® 3016-30G is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

PHOTOMER® 3701 is a tri functional cresol novolac epoxy acrylate diluted in 40% TMPTA. It exhibits of good chemical and heat resistance, high surface hardness and has a high reactivity.

Omnipol 9210 is a photo-initiator with high reactivity, good compatibility, low odor and migration, and with low fragments releasing after curing. It is especially designed for use in inks and coatings requiring low migration and low volatiles.

Omnirad OMBB is a near odorless Type II photoinitiator which, when used with tertiary amine synergists, initiates radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

PHOTOMER 4307 is a high boiling point monomeric liquid with a relative low viscosity. PHOTOMER 4307 is a tetra functional monomer which under exposure to ionizing radiation or added sources of free radicals undergoes polymerization.

PHOTOMER® 4056 is a clear, high boiling, water soluble monomeric di-ester liquid. PHOTOMER® 4056 is a long chain crosslinking agent, when polymerized it is a flexible, clear infusible resin.

PHOTOMER® 3016-40G is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

Omnirad EMK is a bimolecular photoinitiator, suitable for UV-polymerisation of mono- or multifunctional (meth)acrylates.

PHOTOMER® 3016-60G is a low viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

PHOTOMER® 2006 (TMPTMA) is a highly reactive trifunctional crosslinking agent which has polymerizing characteristics similar to those of methyl methacrylate.

PHOTOMER® 6009 is a proprietary, non yellowing, aliphatic urethane acrylate oligomer developed for radiation curable systems. This premium oligomer of low viscosity eliminates the need to melt out the oligomer prior to use. PHOTOMER® 6009 is an excellent film former and it exhibits excellent light stability and outstanding haze, scratch and abrasion resistance.

Photomer® 4184 is a monofunctional urethane acrylate which can be used as a reactive diluent for radiation curable coatings, inks and adhesives. It is non-yellowing with a low odor and offers improved flexibility and adhesion to plastics. It exhibit of low shrinkage and high elongation and stress at break with a Tg of - 3°C.

PHOTOMER® 4142 (THFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UVand EB curable applications. Photomer 4142 offers good flexibility and toughness, low Tg and excellent solvency.

Photomer 6024 is an aliphatic urethane diacrylate oligomer which exhibits, good flexibility, yellowing resistance and good UV/EB cure reactivity.

Omnirad 81 is a eutectic photoinitiator blend of benzophenone and 4-Methylbenzophenone. Omnirad 81 is liquid at room temperature and has excellent solubility characteristics. The high photochemical efficiency of omnirad 81 makes it an ideal photo-catalyst for UV initiated formulations

PHOTOMER® 4335 is a multifunctional monomer which contains a mixture of tri and tetra acrylate. It can be used in a variety of UV curable applications, where a high degree of cross linking is required.

Esacure KIP 100F is a liquid mixture of Esacure KIP 150 (70% ) and Omnirad 1173 (30%) and is particularly recommended for high reactivity, low odor and color stability.

PHOTOMER® 4211 is a highly reactive monofunctional acrylate monomer, it can be used as a low viscosity diluent for ultraviolet radiation cured systems.

Omnirad TPO-L is a highly efficient, liquid, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates and unsaturated polyesters containing styrene, after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

PHOTOMER® 5662 is a tetra functional oligomer used in UV/EB curable systems. The product exhibits a medium viscosity. It gives a high crosslinking density with a high reactivity.