Products

PHOTOMER® 4250 is a 100% active, multifunctional amine acrylate. This product is primarily used in place of free amines. PHOTOMER® 4250 offers an excellent way to increase system cure speeds, while minimizing amine migration and ink burn-out.

Photomer® 4967 is an acrylated amine adduct, which exhibits low viscosity, low odor, improved stability, and excellent compatibility with monomers and oligomers. Cure characteristics and adhesion properties are enhanced when this product is properly formulated with photocatalyst (benzophenone).

Omnirad ITX is a highly effective type II photoinitiator used, in combination with tertiary amine synergists to, initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Omnirad 73 is a highly efficient, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

PHOTOMER® 5028 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4094 (GPTA). It has been designed for use in UV/EB curable formulations for substrates such as wood, paper, plastic and metal. The product can aid adhesion to difficult substrates such as plastics.

Omnirad 907 is a highly efficient photoinitiator which is used to initiate the photo polymerization of unsaturated prepolymers, e.g., acrylates, in combination with mono- or multifunctional vinyl monomers.

Omnirad DETX is a highly effective Type II photoinitiator. In conjunction with tertiary amine synergists it is used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .

Esacure 1001 M is a difunctional Type II photoinitiator of the ketosulphone class. It is used to initiate radical polymerisation of unsaturated oligomers e.g. acrylates after UV exposure.

Omnirad BDK is a highly efficient, type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

Omnirad TPO is a highly efficient, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

PHOTOMER® 5006 is a low viscosity, amine synergist with medium amine content. A co-polymerizable tertiary amine PHOTOMER® 5006 is used as a highly efficient co-initiator. In combination with UV acrylates it accelerates the cure of UV systems.

Omnirad 127 D is a highly efficient Type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates – in combination with mono- or multifunctional monomers. Omnirad 127 D is especially suitable for all types of pigmented UV inks (offset, screen, flexo and inkjet) and clear coatings, particularly in thin coatings (such as overprint varnishes) but also in a variety of coating applications.

PHOTOMER® 4780 is a is an amine acrylate of medium viscosity to be used as an amine synergist in UV curable inks and coatings.

Omnirad CPTX is a highly efficient Type II photoinitiator which, used in combination with tertiary amine synergists to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. Omnirad CPTX may also be used as a sensitiser and in particurlarly iodonium salt in cationic cure.

PHOTOMER® 2204 is a di functional acid methacrylate for use in UV systems and especially as adhesion promoter for metal applications.

Omnirad 127 is a highly efficient Type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates – in combination with mono- or multifunctional monomers. Omnirad 127 is especially suitable for all types of pigmented UV inks (offset, screen, flexo and inkjet) and clear coatings, particularly in thin coatings (such as overprint varnishes) but also in a variety of coating applications.

PHOTOMER® 4068 is a low viscosity, amine synergist. In combination with UV acrylates it accelerates the cure of UV systems.

Omnirad OMBB is a near odorless Type II photoinitiator which, when used with tertiary amine synergists, initiates radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

PHOTOMER® 4771 is an amine modified diacrylate which exhibits moderate viscosity, low odor and excellent monomer/oligomer compatibility. This amine synergist will enhance the cure characteristics as well as adhesion properties when properly formulated with photosensitizing initiators such as benzophenone.

PHOTOMER® 4775 is an amine acrylate of intermediate viscosity to be used as an amine synergist in UV curable inks and coatings;

PHOTOMER® 4703 is a proprietary UV/EB curable monoacrylate with low viscosity. It is designed for use in laminating adhesives, etch-resist inks for printed circuit boards, negative photoresists and OPV's for paper and films.

Photomer® 4184 is a monofunctional urethane acrylate which can be used as a reactive diluent for radiation curable coatings, inks and adhesives. It is non-yellowing with a low odor and offers improved flexibility and adhesion to plastics. It exhibit of low shrinkage and high elongation and stress at break with a Tg of - 3°C.

Photomer® 4003 is a monofunctional aromatic acrylate of low viscosity, moderate odor, good cure speed and is classified as a skin irritant and sensitizer. Due to the monofunctional character of its backbone, it has been found useful as a flexibilizer and as an adhesion promoter. It is suggested for use in UV/EB curable flexo, screen and flexographic inks, clear coatings and lacquers.

Omnirad TPO-L is a highly efficient, liquid, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates and unsaturated polyesters containing styrene, after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

Omnirad MBF is a highly efficient, liquid, Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It forms free radicals through an intramolecular hydrogen abstraction process. The use of amines is not recommended as this may lead to efficiency decrease, stability upon storage issues or stronger odor. It can be used in combination with mono or multi functional monomers as reactive diluents

Omnirad EMK is a bimolecular photoinitiator, suitable for UV-polymerisation of mono- or multifunctional (meth)acrylates.

PHOTOMER® 4173 is a proprietary UV/EB curable acrylate oligomer of low functionality and low viscosity. Designed primarily for use in etch-resist inks for printed circuit board manufacture, it can be readily formulated into a UV curable screen ink which exhibits good scratch resistance and improved stripping characteristics.

Omnirad 369 is a highly efficient UV-curing agent used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional monomers.