Products

Esacure TZT is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

Omnipol BP is a difunctional benzophenone photoinitiator specifically designed for use in inks and coatings requiring low migration and low volatility. It is particularly suited to use in combination with amine synergists and non-pigmented coatings as an alternative to benzophenone.

Omnirad 500 is a highly effective liquid photoinitiator, used for UV-polymerisation of suitable resins. The low viscosity allows lower of the viscosity of the total formulation. Well suited for water-based formulation.

Omnicat 440 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

Omnicat 320 is a colorless liquid photoinitiator of mixed triarylsulfonium hexafluoroantimonate salts in propylene carbonate. Omnicat 320 has been designed for the cationic curing of inks and coatings based on epoxy, oxetane, and vinyl ether formulations. Omnicat 320 exhibits high cure-speed, low odor, and excellent post cure.

Photomer® 4967 is an acrylated amine adduct, which exhibits low viscosity, low odor, improved stability, and excellent compatibility with monomers and oligomers. Cure characteristics and adhesion properties are enhanced when this product is properly formulated with photocatalyst (benzophenone).

Omnirad ITX is a highly effective type II photoinitiator used, in combination with tertiary amine synergists to, initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Omnirad BP Flakes is a highly effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

PHOTOMER® 5028 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4094 (GPTA). It has been designed for use in UV/EB curable formulations for substrates such as wood, paper, plastic and metal. The product can aid adhesion to difficult substrates such as plastics.

Omnirad DETX is a highly effective Type II photoinitiator. In conjunction with tertiary amine synergists it is used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Omnirad 4PBZ is an effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Esacure KT 55 is a liquid mixture of Esacure TZT (50%) and Esacure KIP 150 (50%). IT is used in combination with a co initiator and is particularly suitable when high reactivity and low yellowing are required.

Omnicat 550 is a highly reactive odorless and benzene free photoinitiator designed for use in cationic curing inks and coatings. It is particularly suited to use in pigmented inks. Omnicat 550 has good solubility in the cycloaliphatic epoxides and oxetane diluents used in cationic UV curing formulations. Omnicat 550 is not sensitized by either hydroxyketone photoiniators, thioxanthones or anthracene derivatives.

Omnicat 432 is a mixture of triarylsulfonium hexafluorophosphate salts and propylene carbonate, for cationic curing of epoxy, oxetane, and vinyl ether formulations.

Omnirad BDK is a highly efficient, type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

Esacure TZM is a liquid mixture of Benzophenone (50%) and 4-Methylbenzophenone (50%). It is particularly indicated for the photopolymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

Omnirad BCIM is a versatile highly effective photoinitiator for UV polymerisation of mono- or multifunctional (acrylate-) monomers.

PHOTOMER® 4149 TF is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

Omnicat 445 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

PHOTOMER® 4226 TF (DPGDA)is a toluene free aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

PHOTOMER® 5006 is a low viscosity, amine synergist with medium amine content. A co-polymerizable tertiary amine PHOTOMER® 5006 is used as a highly efficient co-initiator. In combination with UV acrylates it accelerates the cure of UV systems.

PHOTOMER® 4771 is an amine modified diacrylate which exhibits moderate viscosity, low odor and excellent monomer/oligomer compatibility. This amine synergist will enhance the cure characteristics as well as adhesion properties when properly formulated with photosensitizing initiators such as benzophenone.

Omnirad 127 is a highly efficient Type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates – in combination with mono- or multifunctional monomers. Omnirad 127 is especially suitable for all types of pigmented UV inks (offset, screen, flexo and inkjet) and clear coatings, particularly in thin coatings (such as overprint varnishes) but also in a variety of coating applications.

Omnirad OMBB is a near odorless Type II photoinitiator which, when used with tertiary amine synergists, initiates radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnicat BL-550 is a liquid photoinitiator blend, based on Omnicat 550 (20%), Propylene Carbonate (25%) and cycloaliphatic epoxy (55%).

PHOTOMER® 4703 is a proprietary UV/EB curable monoacrylate with low viscosity. It is designed for use in laminating adhesives, etch-resist inks for printed circuit boards, negative photoresists and OPV's for paper and films.

Omnirad TPO-L is a highly efficient, liquid, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates and unsaturated polyesters containing styrene, after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

Omnirad MBF is a highly efficient, liquid, Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It forms free radicals through an intramolecular hydrogen abstraction process. The use of amines is not recommended as this may lead to efficiency decrease, stability upon storage issues or stronger odor. It can be used in combination with mono or multi functional monomers as reactive diluents

Omnipol 9210 is a photo-initiator with high reactivity, good compatibility, low odor and migration, and with low fragments releasing after curing. It is especially designed for use in inks and coatings requiring low migration and low volatiles.

Esacure 1187 is a modified sulphonium salt hexafluorophosphate diluted in 25% propylene carbonate, which does not release any benzene upon cure.

Omnirad BMS is a highly effective Type II photoinitiator used to initiate radical polymerization of unsaturated monomers and oligomers e.g. acrylates after exposure to UV light

Omnipol 2702 is a di-functional polymeric benzophenone derivative type II photoinitiator, specifically designed for use in inks and coatings requiring low migration and low volatility. Omnipol 2702 exhibits extremely low odor, low migration and good reactivity in comparison to other polymeric initiators

Omnirad 4MBZ Flakes is an effective Type II photoinitiator used, in combination with tertiary amine synergists, to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.