Products

Omnirad 184 is a highly efficient non-yellowing photoinitiator used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional vinyl monomers.

Esacure TZT is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

Omnirad 500 is a highly effective liquid photoinitiator, used for UV-polymerisation of suitable resins. The low viscosity allows lower of the viscosity of the total formulation. Well suited for water-based formulation.

Omnipol BP is a difunctional benzophenone photoinitiator specifically designed for use in inks and coatings requiring low migration and low volatility. It is particularly suited to use in combination with amine synergists and non-pigmented coatings as an alternative to benzophenone.

Omnirad 2959 is a highly efficient non-yellowing Type I photoinitiator for the UV curing of systems comprising of unsaturated monomers and prepolymers. It is especially suited where low odor is required and for use in water-borne systems based on acrylate or unsaturated polyester resins. The active hydroxy group can be reacted with suitable functionalized unsaturated resins

Omnicat 320 is a colorless liquid photoinitiator of mixed triarylsulfonium hexafluoroantimonate salts in propylene carbonate. Omnicat 320 has been designed for the cationic curing of inks and coatings based on epoxy, oxetane, and vinyl ether formulations. Omnicat 320 exhibits high cure-speed, low odor, and excellent post cure.

Omnicat 440 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

Esacure KIP 150 is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non-yellowing properties. It is particularly recommended when low VOC, low odor and low yellowing are required characteristic.

Omnirad 907 is a highly efficient photoinitiator which is used to initiate the photo polymerization of unsaturated prepolymers, e.g., acrylates, in combination with mono- or multifunctional vinyl monomers.

Omnirad 4265 is a highly effective liquid photoinitiator blend, used for UV-polymerisation of suitable resins. Omnirad 4265 is easily incorporated into waterborne formulations.

Omnirad 4PBZ is an effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnirad BP Flakes is a highly effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnipol TX is a difunctional thioxanthone photoinitiator specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in offset printing inks as an alternative to Omnirad ITX (Isopropyl thioxanthone) in combination with other photoinitiators and amine synergists.

Omnipol ASA is a liquid polymeric amine synergist specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in combination with low migration Type II photoinitiators as Omnipol BP and TX.

Photomer® 4071 is a low viscosity and low odor diluent for UV and EB radiation curable varnishes and pigmented coatings like inks as well as for UV inkjet applications.

Omnirad BCIM is a versatile highly effective photoinitiator for UV polymerisation of mono- or multifunctional (acrylate-) monomers.

Omnirad BDK is a highly efficient, type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

PHOTOMER® 6210 is a proprietary, non-yellowing aliphatic urethane developed for radiation curable systems. This premium oligomer with very low viscosity provides excellent light stability, chemical resistance, abrasion resistance and flexibility. The low viscosity of this urethane acrylate allows formulators wide formulating latitude, permits high oligomer content or lower formulation viscosities. Also this oligomer exhibits low odor, good cure speed and excellent adhesion to various plastic and metal substrates.

Esacure TZM is a liquid mixture of Benzophenone (50%) and 4-Methylbenzophenone (50%). It is particularly indicated for the photopolymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .

Photomer® 3016 is a high viscosity, non-volatile, di functional acrylate ester derived from a low molecular weight aromatic epoxy resin. The product exhibits fast cure speed, low odor and low skin irritancy. It is an excellent film former and contributes to unique performance properties typical of epoxy resins in UV/EB curable formulations.

Esacure KT 55 is a liquid mixture of Esacure TZT (50%) and Esacure KIP 150 (50%). IT is used in combination with a co initiator and is particularly suitable when high reactivity and low yellowing are required.

Omnicat 432 is a mixture of triarylsulfonium hexafluorophosphate salts and propylene carbonate, for cationic curing of epoxy, oxetane, and vinyl ether formulations.

Omnicat 550 is a highly reactive odorless and benzene free photoinitiator designed for use in cationic curing inks and coatings. It is particularly suited to use in pigmented inks. Omnicat 550 has good solubility in the cycloaliphatic epoxides and oxetane diluents used in cationic UV curing formulations. Omnicat 550 is not sensitized by either hydroxyketone photoiniators, thioxanthones or anthracene derivatives.

PHOTOMER® 4149 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PHOTOMER® 4226 (DPGDA) is an aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

Omnirad 4MBZ Flakes is an effective Type II photoinitiator used, in combination with tertiary amine synergists, to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnicat BL-550 is a liquid photoinitiator blend, based on Omnicat 550 (20%), Propylene Carbonate (25%) and cycloaliphatic epoxy (55%).

PHOTOMER® 4017 TF (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PHOTOMER® 3016-25T is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

Esacure KIP 75 LT is a liquid mixture of Esacure KIP 150 (75%) and Tripropyleneglycoldiacrylate(25%). It is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non-yellowing properties. It is particularly recommended when low odor is a required characteristic.

Photomer® 4061 (TPGDA) is a difunctional acrylate of low viscosity, low odor and moderate skin irritancy. A reactive monomer with good cure response, it forms films that are flexible, hard and glossy. Photomer® 4061 exhibits good solvency and viscosity reducing characteristics with typical radiation curable oligomers and prepolymers.

PHOTOMER® 4226 TF (DPGDA)is a toluene free aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

Omnipol 2702 is a di-functional polymeric benzophenone derivative type II photoinitiator, specifically designed for use in inks and coatings requiring low migration and low volatility. Omnipol 2702 exhibits extremely low odor, low migration and good reactivity in comparison to other polymeric initiators

PHOTOMER® 6010 is a proprietary, non-yellowing aliphatic urethane developed for radiation curable systems. This premium oligomer of low viscosity eliminates the need to melt the oligomer prior to use. An excellent film former, it exhibits excellent light stability and weatherability for outdoor applications and outstanding haze, scratch and abrasion resistance.