Products

PHOTOMER® 2012 (IBOMA) is a very low viscosity monofunctional methacrylated monomer which can be polymerized in the presence of free radicals. It is typically used in UV and EB curable applications.

PHOTOMER® 5930 is a tetra functional amine modified polyether acrylate used in UV/EB applications.

PHOTOMER® 4012 (IBOA) is a very low viscosity monofunctional acrylated monomer which can be polymerized in the presence of free radicals. It is typically used in UV and EB curable applications.

PHOTOMER® 6692 is a non-yellowing hexa-functional petia free and tin free aliphatic urethane acrylate with relatively low viscosity. It exhibits of excellent adhesion and scratch resistance.

PHOTOMER® 4846 is a solution of an adhesion promoter resin dissolved in 1,6-Hexanediol Diacrylate. This clear, low viscosity resin solution imparts enhanced adhesion to various treated plastics and metals. It is also useful for increasing adhesion to metals and foil.

PHOTOMER® 5028 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4094 (GPTA). It has been designed for use in UV/EB curable formulations for substrates such as wood, paper, plastic and metal. The product can aid adhesion to difficult substrates such as plastics.

PHOTOMER® 4141 (CTFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. This Cyclic Trimethylolpropane Formal Acrylate (CTFA) is typically used in UV and EB curable applications. PHOTOMER® 4141 offers good solvency and very good adhesion properties on metals and plastics.

PHOTOMER® 5429 is a low viscosity tetra functional polyester acrylate oligomer. When exposed to UV/EB radiation, this product cures rapidly and has good adhesion particularly to metal substrates. PHOTOMER® 5429 is recommended for use in UV/EB clear and pigmented systems.

Omnilane OC 3005 cycloaliphatic epoxide is a standard flexibilizing cycloaliphatic epoxide resin. It is useful in many applications in which a higher viscosity or more flexible film is required.

PHOTOMER® 3016-40R is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

PHOTOMER® 9502 is a full acrylic resin diluted with 25% PHOTOMER® 4061 (TPGDA) and 25% PHOTOMER® 4017 (HDDA). It can provide improved adhesion to difficult substrates, and improve intercoat adhesion.

Photomer 5442 is a modified polyester for printing inks. Photomer 5442 exhibits excellent pigment wetting and good flexibility.

Omnivad Mirroflex SB 50 % is a product specifically designed for the Energy Curing coating and ink industry. This product can be used in many applications where high gloss and flexibility are required. Omnivad Mirroflex SB 50% is an outstanding coating modifier for clear and pigmented coatings.

PHOTOMER® 6210 is a proprietary, non-yellowing aliphatic urethane developed for radiation curable systems. This premium oligomer with very low viscosity provides excellent light stability, chemical resistance, abrasion resistance and flexibility. The low viscosity of this urethane acrylate allows formulators wide formulating latitude, permits high oligomer content or lower formulation viscosities. Also this oligomer exhibits low odor, good cure speed and excellent adhesion to various plastic and metal substrates.

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .

PHOTOMER® 2317 is a Hydroxypropyl Methacrylate (HPMA) which provides important properties to polymer products including hydrophilicity, improved adhesion to substrates, and crosslinking sites.

PHOTOMER® 4810 is used as mono functional monomer used as a flexibilizing agent in UV Radcure coatings and inks.

PHOTOMER® 6019 is a proprietary, non-yellowing aliphatic urethane oligomer developed for UV/EB curable systems. This medium viscosity acrylate resin exhibits good adhesion to flexible plastics, metal and glass. It is Recommended as a primary oligomer for secondary coatings in optical fibers, fiber-optic sensors and light pipes. Excellent weatherability, scratch, scuff and mar resistance are characteristics of this oligomer.

PHOTOMER® 4094 (GPTA) is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent reactivity. Designed for UV/EB curable systems, it produces films of high crosslink density which are more flexible than those of first generation monomers such as TMPTA without sacrificing cure speed.

PHOTOMER® 5042 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4006. It has been designed to provide adhesion to substrates like metals, wood and plastics such as polyethylene (PE) and polypropylene (PP).

Photomer® 4158 is a high molecular weight analog of ethoxylated TMPTA (Photomer® 4149). Because of its increased ethoxylate content, Photomer® 4158 exhibits greater hydrophilic characteristics than unmodified acrylate polyols and will provide an excellent starting point for developing water dispersible UV/EB curable inks and coatings.

PHOTOMER® 5500 is a hyper branched polyester acrylate which exhibits of high functionality (12 – 15) with relatively low viscosity. It provides low shrinkage, good toughness and fast cure speed.

PHOTOMER® 4149 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

PHOTOMER® 4808 is a low viscosity, monofunctional acrylated monomer/reactive diluent, for use in radical initiated UV radiation cured coatings, inks and adhesives. PHOTOMER® 4808 has a hydrophobic backbone and exhibits good flexibility and excellent adhesion on non-polar substrates.

PHOTOMER® 6644 is a non yellowing di functional aliphatic urethane acrylate, which exhibits of excellent flexibility and elongation.

PHOTOMER® 5450 is a hexafunctional polyester acrylate recommended for fast cure and pigmentwetting.

Photomer® 3005 is a reactive epoxy soybean oil acrylate. It has 100% solids and medium viscosity designed for UV/EB curable systems. It forms flexible films, exhibits moderate cure speed and low odor. Due to its oleophilic character, it contributes toward enhanced compatibility with hydrophobic (nonpolar) substrates and it enhances the wetting of organic pigments.

PHOTOMER® 6578 is a low viscosity tetra functional aromatic acrylate, which gives very good abrasion and scratch resistance in combination with high flexibility.

PHOTOMER® 9145 is an Unsaturated polyester oligomer diluted in DPGDA recommended for adhesion and pigment wetting.

PHOTOMER® Aqua 6901 is a tin free water-dilutable di functional urethane acrylate oligomer with good flexibility and exhibits good compatibility with water.

PHOTOMER® 6184 is a medium viscosity, nonvolatile, proprietary urethane acrylate oligomer blended with 20 % PHOTOMER® 4061 (TPGDA). This product exhibits good cure response and low odor. It is an excellent film former and contributes unique performance properties typical of urethane resins in UV/EB curable formulations.

PHOTOMER® 4812 is a mono functional acrylate monomer, used as flexibilizing agent in coatings and inks. It will also increase water resistance properties due to its hydrocarbon backbone.

PHOTOMER® 5443 is a hexafunctional polyester acrylate with high reactivity and exhibit of good pigment wetting performance, good hardness, good scratch and solvent resistance.

PHOTOMER® 5444 is modified polyester acrylate that exhibit good flexibility.

PHOTOMER® 3016-20D is a medium viscosity, non-volatile, difunctional epoxy acrylate oligomer derived from a lower molecular weight aromatic epoxy resin, which is then with 20% PHOTOMER® 4226 (DPGDA). The product is designed for use in UV/EB curing applications and exhibits fast cure speed, good solvent resistance and high gloss.

Omnimer VCL is a reactive diluent for radical initiated UV radiation cured coatings and inks with excellent hydrophobic properties and good flexibility.