Products

Omnirad 184 is a highly efficient non-yellowing photoinitiator used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional vinyl monomers.

Esacure TZT is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

Esacure A 198 is a polyfunctional high molecular weight amine. It is co-initiator that when combined with type II photoinitiators gives high speed cure in both clear and pigmented systems. It develops a very low level of odor and yellowing during and after curing. Due to its molecular structure it is particularly suitable for all systems where low migration and low extraction values are needed (food packaging).

Omnirad 819 is a versatile photoinitiator for radical polymerization of unsaturated resins upon UV light exposure. It is especially suitable for white pigmented Formulations, the curing of glass-fiber-reinforced polyester/styrene systems and for clear coats for outdoor use in combinations with light stabilizers. Thick section curing is also possible with this photoinitiator.

Esacure ONE is a difunctional alpha-hydroxy ketone photoinitiator. It is a highly reactive difunctional photoinitiator particularly suitable for clear systems. Due to its molecular structure it is particularly suitable for all systems where low VOC, low migration and low extraction values are needed (food packaging).

Omnirad 2100 is a highly efficient liquid curing agent to initiate radical polymerization of unsaturated resins after exposure to UV light such as those based on a prepolymer – e.g., acrylates and unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive thinners. It is well suitable for formulations in which Omnirad TPO is used. Omnirad 2100 provides all the handling advantages of a liquid product. In thicker coatings Omnirad 2100 offers improved bottom curing compared with that of Omnirad TPO. It is especially suitable for white-pigmented formulations with minimal yellowing after curing and for coatings with low pigment volume concentration. Therefore Omnirad 2100 can be offered in almost all applications as a one-to-one replacement for Omnirad TPO with certain advantages.

Omnirad 500 is a highly effective liquid photoinitiator, used for UV-polymerisation of suitable resins. The low viscosity allows lower of the viscosity of the total formulation. Well suited for water-based formulation.

PHOTOMER® 5930 is a tetra functional amine modified polyether acrylate used in UV/EB applications.

Omnipol BL 728 is polymeric photoinitiator blend which contains a high concentration of Omnipol TX in a polymeric carrier. Due to the choice of the components this blend can be easily handled and stored at room temperature.

Omnipol BP is a difunctional benzophenone photoinitiator specifically designed for use in inks and coatings requiring low migration and low volatility. It is particularly suited to use in combination with amine synergists and non-pigmented coatings as an alternative to benzophenone.

Omnirad 379 is a highly efficient UV-curing agent used to initiate the photo polymerization of unsaturated prepolymers in combination with mono- or multifunctional monomers. Omnirad 379 is especially suitable for pigmented UV-curable systems, photoresists and printing plates. Its excellent solubility (compared to Omnirad 369) makes it easy to incorporate into nearly all formulations.

Omnirad 2959 is a highly efficient non-yellowing Type I photoinitiator for the UV curing of systems comprising of unsaturated monomers and prepolymers. It is especially suited where low odor is required and for use in water-borne systems based on acrylate or unsaturated polyester resins. The active hydroxy group can be reacted with suitable functionalized unsaturated resins

Omnicat 270 is a photo initiator recommended for the cationic polymerization of formulations based on epoxies or oxetane. Omnicat 270 is a solid of a high-molecular-weight sulfonium salt free of heavy metals. Omnicat 270 develops very low odor during and after curing and shows very low migration properties which makes the product especially suitable for food packaging applications.

Omnicat 320 is a colorless liquid photoinitiator of mixed triarylsulfonium hexafluoroantimonate salts in propylene carbonate. Omnicat 320 has been designed for the cationic curing of inks and coatings based on epoxy, oxetane, and vinyl ether formulations. Omnicat 320 exhibits high cure-speed, low odor, and excellent post cure.

Omnirad 2022 is a highly efficient liquid curing agent that is used to initiate radical polymerization of unsaturated resins after exposure to UV light. Omnirad 2022 is the first choice for use in pigmented formulations of all colors, for curing of thick sections or for UV-stabilized clear coatings. Unsaturated resins that are particularly suitable are those based on a prepolymer – e.g., acrylates or unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive diluents. Omnirad 2022 is a photoinitiator mixture with well-balanced surface and through cure.

Esacure KTO 46 is a stable liquid mixture of Trimethylbenzoyldiphenylphosphineoxide and - hydroxy ketones and Benzophenone derivatives.It is particularly indicated for the photopolymerisation of UV curable pigmented systems when high reactivity, low curing odor and low yellowing are required.

Omnirad ITX is a highly effective type II photoinitiator used, in combination with tertiary amine synergists to, initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Omnicat 440 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

Esacure KIP 150 is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non-yellowing properties. It is particularly recommended when low VOC, low odor and low yellowing are required characteristic.

Omnirad DETX is a highly effective Type II photoinitiator. In conjunction with tertiary amine synergists it is used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Omnirad 907 is a highly efficient photoinitiator which is used to initiate the photo polymerization of unsaturated prepolymers, e.g., acrylates, in combination with mono- or multifunctional vinyl monomers.

Omnirad 4265 is a highly effective liquid photoinitiator blend, used for UV-polymerisation of suitable resins. Omnirad 4265 is easily incorporated into waterborne formulations.

PHOTOMER® 4846 is a solution of an adhesion promoter resin dissolved in 1,6-Hexanediol Diacrylate. This clear, low viscosity resin solution imparts enhanced adhesion to various treated plastics and metals. It is also useful for increasing adhesion to metals and foil.

Omnirad 4PBZ is an effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnirad BP Flakes is a highly effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnipol TX is a difunctional thioxanthone photoinitiator specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in offset printing inks as an alternative to Omnirad ITX (Isopropyl thioxanthone) in combination with other photoinitiators and amine synergists.

PHOTOMER® 5429 is a low viscosity tetra functional polyester acrylate oligomer. When exposed to UV/EB radiation, this product cures rapidly and has good adhesion particularly to metal substrates. PHOTOMER® 5429 is recommended for use in UV/EB clear and pigmented systems.

Omnirad 73 is a highly efficient, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Omnipol ASA is a liquid polymeric amine synergist specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in combination with low migration Type II photoinitiators as Omnipol BP and TX.

Photomer® 4071 is a low viscosity and low odor diluent for UV and EB radiation curable varnishes and pigmented coatings like inks as well as for UV inkjet applications.

Omnirad BCIM is a versatile highly effective photoinitiator for UV polymerisation of mono- or multifunctional (acrylate-) monomers.

Omnirad BDK is a highly efficient, type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

PHOTOMER® 6210 is a proprietary, non-yellowing aliphatic urethane developed for radiation curable systems. This premium oligomer with very low viscosity provides excellent light stability, chemical resistance, abrasion resistance and flexibility. The low viscosity of this urethane acrylate allows formulators wide formulating latitude, permits high oligomer content or lower formulation viscosities. Also this oligomer exhibits low odor, good cure speed and excellent adhesion to various plastic and metal substrates.

Esacure TZM is a liquid mixture of Benzophenone (50%) and 4-Methylbenzophenone (50%). It is particularly indicated for the photopolymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .

Esacure KT 55 is a liquid mixture of Esacure TZT (50%) and Esacure KIP 150 (50%). IT is used in combination with a co initiator and is particularly suitable when high reactivity and low yellowing are required.