Products

When your application calls for a general purpose hardener at low temperatures, Amirez 148/024 exceeds all performance expectations, meeting every specification requirement with speed and a greater degree of technical excellence. This low viscosity, fast cure waterborne reactive polyamide adduct has all application angles covered, from floor and wall painting to hygiene coatings.

Amirez 148/055, the perfect cure for formulation challenges. Even better when you discover it's been developed to address high gloss with fast cure, no blushing and water resistance. It creates floor coatings with unrivaled performance characteristics, such as excellent hardness, superb water and chemical resistance. It seals and protects to give high gloss and esthetically pleasing, durable floors.

Amirez 142 allows easy mixing with epoxys onsite. Using Amirez® 142 in your coating formulation helps create a coating that protects, and goes on protecting, for years and years. APEO and formaldehyde free, it promotes excellent chemical resistance. With features such as visible end of pot life, it’s easy to see why it’s the perfect solution for a wide variety of applications.

A bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in one component PU systems, where it is normally used with aliphatic prepolymers.

Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings. Used in conjunction with low NCO polyurethane prepolymers, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford cross-linking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios.

Incozol 2 acts as an effective moisture scavenger in polyurethane coatings. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content.