company tower banner
Indestructible Paint Company Logo

Indestructible Paint IP7985 Range Anti Corrosion Low Friction Coating

IP7985 Range Anti Corrosion Low Friction Coating is a temperature-resistant baking epoxy finish enhanced with fluoropolymer additives to provide a wear-resistant low friction coating. The choice of binder resin and additive employed in IP7985 provides excellent adhesion and protection properties for a wide range of ferrous and non-ferrous substrates. Examples of this coating find use as diverse as brake calipers for high-performance luxury and sports cars to drill pipe sensors for the oil and gas exploration industry.

Product Type: Dry Lubricants

Compatible Substrates & Surfaces: Iron, Metal

Features: Corrosion Resistant, Good Adhesion, Low Friction, Temperature Resistance, Wear Resistant

Chemical Family: Epoxy & Epoxy Derivatives

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type
Components
  • Single Pack Product.
  • May be thinned for application using 42000 thinner.

Features & Benefits

Applications & Uses

Compatible Substrates & Surfaces
Application
  • Surface Preparation - All substrates must be clean and oil/grease free as a minimum. Light grit blasting is the preferred surface treatment. Primers from the Indestructible Paint IP985 range are also recommended where enhanced corrosion protection is required.
  • Paint Preparation - Stir well before use. Use an addition of 5 - 10 % 42000 thinner for spray application.
  • Application Method - Designed for spray application. Touch-up areas may be brushed.
  • Drying Curing
    • Flash off - 15 minutes ambient
    • Pre-Cure - 30 minutes at 140°C - 150°C
    • Full Cure - 60 - 80 minutes at 180°C - 190°C
Solvent/Cleanup

40006 Gun Cleaner

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Supply Viscosity (21°C - 25°C)60 - 80sISO5
Flash Point21 - 32°C
VOC Content550 - 590g/l
Density1.05 - 1.15kg/l
Theoretical Coverage (25 Micron)7.0 - 10.0m²/l

Regulatory & Compliance

Approvals/Specifications
  • May be used as equivalent to Xylan 1270/5200.
  • Molykote D708
  • EM 6110

Technical Details & Test Data

Performance

Designed to provide a firmly adherent abrasion-resistant low friction coating. The recommended coating thickness range is 30 - 500 microns depending upon the application.

The applied and cured coating provides an excellent level of substrate protection due to its chemical-resistant barrier properties.

The coating provides an easy clean non-stick coating for surfaces open to local atmospheric conditions or self-lubricating properties when employed in an enclosed environment such as oil/gas drilling sensors.

Packaging & Availability

Pack Size
  • 1 Liter
  • 5 Liter

Storage & Handling

Storage
  • Highly flammable liquid - Store and use in accordance with the flammable liquid regulations.
  • Shelf Life - 12 months temperate; 6 months tropical