Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Gloss
- Glossy
- Technologies
- Product Families
- Components
- Single Pack Product.
- May be thinned for application using S030.
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Brushing and black versions can be made to order.
- Coatings have been tested to be resistant to 5Kv at film thicknesses of approximately 80 microns.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Uses
Used in conjuction with IP9310 and IP9029 for protecting magnesium running at 570⁰F, for example on the Viper Engine.
- Application
Surface Preparation
Degrease abrasive blast and pre-treat as per individual specification.
Paint Preparation
Stir well before use.
Application Method
Application by conventional spray or HVLP.
Drying Curing
- Apply to RPS661/22.
- Heat the object to be coated to between 250 - 300°F immediately prior to painting.
- Spray one coat onto the heated object, when the object temperature reaches approx. 140°F, return it to the oven and reheat.
- The coating shall then be stoved by heating the component to 260°F - 340°F for 30 minutes.
- Apply the second coat following the procedure as for the first coat. Repeat the operation until the required film thickness is achieved; flash off for 20 minutes, then stove at 365 - 385°F for 2 hours for full cure.
- Solvent/Cleanup
S30
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Supply Viscosity | 27 - 43 | s | ISO 5 Cup |
Flash Point | 27.0 | °C | — |
VOC Content (As Supplied Mix) | 770.0 | g/l | — |
Density | 1.04 | kg/l | — |
Theoretical Coverage (20 Micron) | 10.0 | m²/l | — |
Regulatory & Compliance
- EU REACH Status
Contains CAS: 872-50-4 which is classified as a SVHC. The future of this chemical is under discussion. SVHC status may lead to restriction of use by authorized users or the chemical may be banned under the REACH process.
- Approvals/Specifications
- MSRR 9142
- OMat 7/134
- OMat 7/260 (Brushing)
- Rolls Royce Code: 139049
- AFS 1566
- MTU: MTS 1521
- NSN 8010-99-0516491
Technical Details & Test Data
- Performance
PL163 is tested to the following minimum specifications; actual performance is far in excess of the following:
- Heat Resistance: 100 hours at 570°F
- Salt Water Fog: 100 hours
- Skydrol: 3 hours at 160°F
Also used in conjunction with IP9310 and IP9029 for protecting magnesium running at 300°C (570°F) for example on the viper engine. Tested to be resistant to 5Kv at film thicknesses of approximately 80 microns.
Packaging & Availability
- Pack Size
- 1 Liters
- 5 Liters
Storage & Handling
- Storage
- Highly flammable liquid - Store and use in accordance with the flammable liquid regulations.
- Shelf Life - 12 months temperate; 6 months tropical