Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Gloss
- Semi-matt
- Technologies
- Product Families
- Components
- Single Pack Product.
- May be thinned for application using IP 9151 or 665-550-025.
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application
- Surface Preparation - Ensure that surfaces are clean and free from dirt, oil and grease.
- Paint Preparation - Stir well before use. All separated material must be re-incorporated into the bulk product. No time limits are specified for the mixing operation. The operator must be satisfied that the product including any thinning solvent is thoroughly mixed before use. Where mechanical mixing is employed care must be taken to not heat the product to above the maximum storage temperature. Mixing in open containers should be limited to < 10-minute periods to ensure that solvent evaporation does not compromise the product. Shaking or rolling in closed containers is an acceptable mixing method for small volume products supplied ready for use.
- Application Method - Degrease components, spray one thin coat (8 - 13 microns), air dry for 10 minutes and stove for one hour at 375°F.
- Drying Curing - Air dry for 10 minutes then stove for 1 hour at 375°F.
- Solvent/Cleanup
IP9151 or 665-550-025
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Supply Viscosity | 28 - 38 | s | ISO4 Cup |
| Flash Point | 27.0 | °C | — |
| VOC Content (As Supplied Mix) | 690.0 | g/l | — |
| Density | 1.22 | kg/l | — |
| Theoretical Coverage (25 Micron) | 9.0 | m²/l | — |
Regulatory & Compliance
- Approvals/Specifications
- MSRR 9274
- RPS661/9
- Rolls Royce Code: 110566
- OMat 4/43
- Kawasaki JMSRR 9276
- NSN: 91-5099-430-9538
- MTU spec MTS-1013A-02
- KHI-JMSRR9274
Technical Details & Test Data
- Performance
- Resistant to dry heat to 570°F.
- Resistant to Skydrol, Ester lubricants and corrosive engine by-products.
- Designed for operating conditions up to 570°F.
- For use where high wear and pitting occurs and as a protection against fretting, where short service life occurs due to chemical attack, corrosion or high temperature or where lubrication internals is often too short.
- Developed at Rolls Royce's request to comply with regulations for the environment specified in their collaboration to meet specifications for JSF that makes certain solvents used in the R1 version unusable.
- Often used as an alternative to MolyKote 3400A.
Packaging & Availability
- Pack Size
1 Liter
Storage & Handling
- Storage
- Highly flammable liquid - Store and use in accordance with the flammable liquid regulations.
- Shelf Life - 12 months temperate; 6 months tropical