Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
- Guaranteed Analysis
Bradyrhizobium japonicum 1.0 × 1010 CFU/mL Density 8.34 lbs./gallon (68oF) - Etymology
Active Ingredient Host Crop Host Tissue Type Bradyrhizobium japonicum Soybean Seed Endophyte
Features & Benefits
- Agrochemicals Features
- Tank Mix Time Restrictions
- To maintain inoculants viability, there is a maximum time all components can be kept in the mix tank:
- Inoculant alone or with non-chlorinated water should be applied to seed within 24 hours.
- With approved seed treatments, inoculant should be applied to seed within 4 hours.
- Features
- Improves yield potential
- Boosts tolerance to drought stress during fl owering and grain fill
- Improves rhizobium nodulation and nitrogen fixation
- Improves water uptake efficiency and plant health in water-limited conditions
- Provides 3 strains of rhizobium nodulation (N13) from ABM
- Helps plants stay healthier under water stress
- Helps reduce wilting by improving water use efficiency
- Includes extender to support rhizobium stability
- What makes biotrinsic™ different
biotrinsic™ consists entirely of endophytes. This means that it lives inside the plant and works from within the plant tissues. It doesn’t just live in the soil. biotrinsic™ delivers a range of benefi ts throughout the season:
- Stress defense against drought and heat
- Greater efficiency of water use
- Nutrient use efficiency
- Hormone production to assist root and plant growth
From Plants for Plants
biotrinsic™ comes from plants and is not discovered in a lab. It’s an all naturally occurring microbe that has been extracted from plants thriving in stressful conditions. We isolate microbes that are abundant in plants that are thriving under stress while other plants around them are not. This allows us to tailor our products to a specific crop and set of stresses.
Probiotics for Plants
By using endophytes, the plants have naturally selected to incorporate these into their own tissue. We apply them at a high concentration to maximize the benefit.
Applications & Uses
- Markets
- Applicable Crop
- Application Rate for Seed Treatment
Crop biotrinsic N13 WD (fl. oz./CWT) biotrinsic E13 WD (fl. oz./CWT) Soybeans 1.1 0.25 Indigo® microbial inoculant is a mixture of live microbes and an inert liquid. To maintain performance of live microbes, the product must be applied and stored as recommended.
- Application Instructions
biotrinsic N13 WD + biotrinsic E13 WD is an all liquid system designed for use in a liquid tank mix in commercial seed treatment systems. For good seed coverage, Indigo generally recommends a minimum of 2.5 fluid oz. liquid slurry per 140k units of soybean seed, in any combination of non-chlorinated water and approved liquid seed treatments. Experienced seed treaters may choose to decrease the total volume applied.
- Prior to adding to the tank, shake well all components (biotrinsic N13 WD, biotrinsic E13 WD, and if applicable biotrinsic M34 WP).
- All components (biotrinsic N13 WD, biotrinsic E13 WD, and if applicable biotrinsic M34 WP) are to be used together.
- Gradually pour components into non-chlorinated water or approved liquid seed treatments.
- When all components are combined (biotrinsic N13 WD, biotrinsic E13 WD, and if applicable biotrinsic M34 WP), the mixture is ready to apply.
- How it works
- Drought: Improves water uptake effi ciency and plant health under water-limited conditions
- Increases microbial colonization in the root zone
- Product Details
Active Ingredients Application
RateCase Treats Bacillus subtilis
1.0 × 107 CFU/g
+
Bradyrhizobium japonicum
1.0 × 1010 CFU/ml1.35 fl oz/CWT (after dilution in mix tank slurry) 400 units or
56,000,000 seeds1.35 fl oz/CWT (after dilution
in mix tank slurry)400 units or
56,000,000 seeds
Properties
- Physical Form
Safety & Health
- Personal Protective Equipment (PPE)
Applicators and handlers are required to wear chemical-resistant gloves, safety glasses, and protective clothing.
Packaging & Availability
- Packaging
- 5×2×40 units
- 400 Units
Storage & Handling
- Storage Conditions
Storage
- Store in a cool location away from direct sunlight below 75F. DO NOT allow the Indigo® microbial inoculant to freeze.
- DO NOT open the package until it is ready to be used. If there is remaining product in the package, seal the package tightly with the desiccant pouch and store as described above.
- Segregate from food and animal feed.
- Keep away from children.
Disposal
- Follow any and all local, state, and federal waste disposal guidelines for inoculants and plant amendments.
- DO NOT discharge into drains, surface water, or groundwater.
- For small releases, the product should be contained, swept up, and disposed of per local regulations for inoculants and plant amendments.
- For large releases, the product should be contained, collected via an appropriate method, and disposed of per local regulations for inoculants and plant amendments.