Products

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM Scale waxes differ from their paraffin counterparts due to a lower degree of refinement resulting in a higher oil content of 1.5% - 5.0%. The greater oil content increases the ability to manipulate the wax compared to the harder and more brittle paraffin wax family - still scale waxes have a negligible tensile strength. Melting points are between 122 and 145°F (50 - 63°C). Scale waxes of 124 to 126°F melting point are used in the match industry. Scale waxes of higher melting point are used in kraft paper industry, e.g. builder's papers, cement bag stock, roofing felt, car liners, and heavy kraft wrappings. Scale waxes of low oil content are required in the manufacture of crayons. Scale waxes are also used as a blend or as alone in making candles.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

Petrolatum is derived from high-viscosity, paraffin-based crude oils. Petrolatums contain minute (or micro), crystalline waxes. Oil is occluded within and between these small crystals. Petrolatum contains both paraffinic and olefinic hydrocarbons; the olefinic hydrocarbons. Olefinic hydrocarbons give petrolatum its "slippery" (oleaginous) character.

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM Scale waxes differ from their paraffin counterparts due to a lower degree of refinement resulting in a higher oil content of 1.5% - 5.0%. The greater oil content increases the ability to manipulate the wax compared to the harder and more brittle paraffin wax family - still scale waxes have a negligible tensile strength. Melting points are between 122 and 145°F (50 - 63°C). Scale waxes of 124 to 126°F melting point are used in the match industry. Scale waxes of higher melting point are used in kraft paper industry, e.g. builder's papers, cement bag stock, roofing felt, car liners, and heavy kraft wrappings. Scale waxes of low oil content are required in the manufacture of crayons. Scale waxes are also used as a blend or as alone in making candles.

IRM Scale waxes differ from their paraffin counterparts due to a lower degree of refinement resulting in a higher oil content of 1.5% - 5.0%. The greater oil content increases the ability to manipulate the wax compared to the harder and more brittle paraffin wax family - still scale waxes have a negligible tensile strength. Melting points are between 122 and 145°F (50 - 63°C). Scale waxes of 124 to 126°F melting point are used in the match industry. Scale waxes of higher melting point are used in kraft paper industry, e.g. builder's papers, cement bag stock, roofing felt, car liners, and heavy kraft wrappings. Scale waxes of low oil content are required in the manufacture of crayons. Scale waxes are also used as a blend or as alone in making candles.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

IRM Scale waxes differ from their paraffin counterparts due to a lower degree of refinement resulting in a higher oil content of 1.5% - 5.0%. The greater oil content increases the ability to manipulate the wax compared to the harder and more brittle paraffin wax family - still scale waxes have a negligible tensile strength. Melting points are between 122 and 145°F (50 - 63°C). Scale waxes of 124 to 126°F melting point are used in the match industry. Scale waxes of higher melting point are used in kraft paper industry, e.g. builder's papers, cement bag stock, roofing felt, car liners, and heavy kraft wrappings. Scale waxes of low oil content are required in the manufacture of crayons. Scale waxes are also used as a blend or as alone in making candles.

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

IRM-Alpha-3050 is normal alpha olephins. Hence they possess highly accessible, terminal, double-bonds. This reactive potential renders these products ideal for manufacturing numerous products. The product is manufactured in the USA by oligomerizing ethylene. The wax-like, higher alpha olefins constitute a small proportion of the total alpha olefin production. So customers are advised to plan their usage with their IRM salesperson. Normal alpha olefins or their derivatives are employed in conjuction with polyethylene co-monomers, plasticizers, synthetic motor oils, lubricants, automotive additives, surfactants, and paper sizing. IRM Alpha Olefins provide versatile tools and components for many other specific applications.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

Petrolatum is derived from high-viscosity, paraffin-based crude oils. Petrolatums contain minute (or micro), crystalline waxes. Oil is occluded within and between these small crystals. Petrolatum contains both paraffinic and olefinic hydrocarbons; the olefinic hydrocarbons. Olefinic hydrocarbons give petrolatum its "slippery" (oleaginous) character.

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

Slack waxes, as opposed to fully refined waxes, have an oil content of from 5 to 30%, depending on the product. They are a welcome by-product of the production of lubricating oils. They can be productively employed in many industrial processes as they are; or they can be mixed, blended, or further refined. The melting points of slack wax varies from 105°F to 150°F. Some examples of applications for slack waxes: in wax emulsions, as binders and water-proofing in artificial woods; in matches; in jar candles; in rust-protection products; in industrial lubricants; in arena-footing; in soil or turf protection; and in fireplace products.

IRM Scale waxes differ from their paraffin counterparts due to a lower degree of refinement resulting in a higher oil content of 1.5% - 5.0%. The greater oil content increases the ability to manipulate the wax compared to the harder and more brittle paraffin wax family - still scale waxes have a negligible tensile strength. Melting points are between 122 and 145°F (50 - 63°C). Scale waxes of 124 to 126°F melting point are used in the match industry. Scale waxes of higher melting point are used in kraft paper industry, e.g. builder's papers, cement bag stock, roofing felt, car liners, and heavy kraft wrappings. Scale waxes of low oil content are required in the manufacture of crayons. Scale waxes are also used as a blend or as alone in making candles.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.