Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Form
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Other Properties
- Processing Information (Extrusion)
- Processing Information (Injection Molding)
- Additional Information
| Value | Units | Test Method / Conditions | |
| Density (23°C) | 1.22 | g/cm3 | ISO 1183 |
| Melt Mass Flow Rate - MFR (230°C/2.16kg) | 2 | g/10min | ISO 1133 |
| Melt Volume Flow Rate - MVR (230°C/2.16kg) | 2.2 | cm3/10 min | ISO 1133 |
| Value | Units | Test Method / Conditions | |
| Charpy Notched Impact Strength (23°C) | 3.5 | kJ/m2 | ISO 179/1eA |
| Tensile Stress at Yield (50 mm/min) | 35 | MPa | ISO 527-2 |
| Tensile Strain at Yield (50 mm/min) | 3.2 | % | ISO 527-2/1A |
| Tensile Modulus (1 mm/min) | 4100 | MPa | ISO 527 |
| Charpy Notched Impact Strength (-20°C) | 2.2 | kJ/m2 | ISO 179/1eA |
| Flexural Modulus (2 mm/min) | 4200 | MPa | ISO 178 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature - HDT/A (1.8 MPa) | 81 | °C | ISO 75-1/-2 |
| Vicat Softening Temperature (A120) | 157 | °C | ISO 306 |
| Vicat Softening Temperature (B120) | 95 | °C | ISO 306 |
| Heat Deflection Temperature - HDT/B (0.45 MPa) | 139 | °C | ISO 75-1,-2 |
| Value | Units | Test Method / Conditions | |
| Ash Content (600°C) | 39 | % | ISO 3451-1/A |
| Value | Units | Test Method / Conditions | |
| Recommended Processing Parameters | Extrusion | - | - |
| Barrel Temperatures | 180 to 220 | °C | - |
| Polymer Melt Temperature | 200 to 230 | °C | - |
| Die Temperature | 190 to 220 | °C | - |
| Mold Temperature | 10 to 50 | °C | - |
| Injection Speed | Slow or Intermediate | - | - |
| Hold Pressure | 50 – 100 % of actual injection pressure | - | - |
| Value | Units | Test Method / Conditions | |
| Recommended Processing Parameters | Injection Molding | - | - |
| Value | Units | Test Method / Conditions | |
| Abbreviated Term | PPH TD40 | - | ISO 1043 |