Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Form
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Additional Information
| Value | Units | Test Method / Conditions | |
| Density (23°C) | 1.04 | g/cm3 | ISO 1183 |
| Melt Volume Flow Rate - MVR (230°C/2.16kg) | 15 | cm3/10min | ISO 1133 |
| Value | Units | Test Method / Conditions | |
| Charpy Notched Impact Strength (23°C) | 5.5 | kJ/m2 | ISO 179/1eA |
| Charpy Notched Impact Strength (-30°C) | 3 | kJ/m2 | ISO 179/1eA |
| Tensile Stress at Yield (50 mm/min) | 19 | MPa | ISO 527-1, -2 |
| Tensile Strain at Yield (50 mm/min) | 3.4 | % | ISO 527 |
| Flexural Modulus (2 mm/min) | 1600 | MPa | ISO 178 |
| Tensile Modulus (1 mm/min) | 1600 | MPa | ISO 527 |
| Nominal Tensile Strain at Break | 22 | % | ISO 527-1,-2 |
| Charpy Impact Strength (23°C) | 109 | kJ/m2 | ISO 179/1eU |
| Charpy Impact Strength (-30°C) | 47 | kJ/m2 | ISO 179/1eU |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature - HDT/A (1.8 MPa) | 51 | °C | ISO 75-1,-2 |
| Heat Deflection Temperature - HDT/B (0.45 MPa) | 91 | °C | ISO 75-1,-2 |
| Value | Units | Test Method / Conditions | |
| Recommended Processing Parameters | Injection Molding | - | — |
| Mold Temperature | 20 to 50 | °C | — |
| Injection Speed | Intermediate | - | — |
| Barrel Temperatures | 190 to 240 | °C | — |
| Polymer Melt Temperature | 210 to 250 | °C | — |
| Hold Pressure Time | as low as possible – to avoid sink marks | - | — |
| Value | Units | Test Method / Conditions | |
| Abbreviated Term | PP/PE TD20 | - | ISO 1043 |