Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Extrusion)
- Processing Information (Injection Molding)
- Additional Information
Value | Units | Test Method / Conditions | |
Charpy Notched Impact Strength (23°C) | 7 | kJ/m2 | ISO 179-1/1eA |
Tensile Stress at Yield (50 mm/min) | 25 | MPa | ISO 527-2 |
Charpy Notched Impact Strength (-20°C) | 3 | kJ/m2 | ISO 179/1eA |
Charpy Unnotched Impact Strength (23°C) | 70 | kJ/m2 | ISO 179 |
Flexural Modulus (2 mm/min) | 2900 | MPa | ISO 178 |
Tensile Modulus (1 mm/min) | 2800 | MPa | ISO 527 |
Tensile Strain at Yield (50 mm/min) | 3.5 | % | ISO 527 |
Value | Units | Test Method / Conditions | |
Density (23°C) | 1.13 | g/cm3 | ISO 1183 |
Melt Mass Flow Rate - MFR (230°C/2.16kg) | 1.6 | g/10 min | ISO 1133 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature - HDT/B (0.45 MPa) | 128 | °C | ISO 75-1,-2 |
Value | Units | Test Method / Conditions | |
Recommended Processing Parameters | Extrusion | - | — |
Barrel Temperatures | 180 to 220 | °C | — |
Polymer Melt Temperature | 200 to 230 | °C | — |
Die Temperature | 190 to 220 | °C | — |
Value | Units | Test Method / Conditions | |
Recommended Processing Parameters | Injection Molding | - | — |
Barrel Temperatures | 190 to 230 | °C | — |
Injection Speed | Intermediate | - | — |
Polymer Melt Temperature | 210 to 250 | °C | — |
Mold Temperature | 15 to 50 | °C | — |
Hold Pressure | 50 – 100% of injection pressure | - | — |
Value | Units | Test Method / Conditions | |
Abbreviated Term | PP/PE TD30 | - | ISO 1043 |