company tower banner
InnoChem Company Logo

K-Bond POLYESTER Transparent Paste

1 of 11 products in this brand
K-Bond Polyester Transparent Paste is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

Product Type: Structural Adhesive

Compatible Substrates & Surfaces: Fiberglass, Metal, Stone

Chemical Family: Polyesters

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Composition
Polyester Cream Hardener Mixed Product

Features & Benefits

Features
  • Light colored liquid polyester stone adhesive
  • Fast curing
  • Can be colored with K-Bond Color Pigments to match many stones
  • Used for laminating stone, filling chips and reinforcement with metal and fiberglass rods
  • Good adhesion to natural stone up to 70 degrees C or 160 degrees F
  • Resistant to water and oil
  • Clear formula
  • Easy to color match
  • Excellent consistency for horizontal applications

Applications & Uses

Compatible Substrates & Surfaces
Processing Conditions
  • Make sure stone surfaces are clean of any substance and dry.
  • Measure out the appropriate amount of polyester resin, then measure out the appropriate amount of hardener.
  • ext carefully mix the components together.
  • Be careful to scrape the sides and bottom of the mixing cup to ensure thorough mixing. Do not ‘stir’ product.
  • This can trap air and cause bubbles.
  • Do not use once gelling has begun.
Uses

Seams, edge repair, laminating stone, filling chips and reinforcement with metal and fiberglass rods.

Properties

Physical Form
Consistency
Paste
Appearance
Paste
Component A
ValueUnitsTest Method / Conditions
Mix Ratio by Weight100.0
Typical Properties
ValueUnitsTest Method / Conditions
Working Time4 - 6minutes
Tack Free20 - 30minutes
Machinable30 - 60minutes
Viscosity1200 - 1700cps
Density9.5 - 10lbs/gal
Specific Gravity1.14 - 1.2
Hardness86 - 88Shore DASTM D-2240
Glass Transition Temperature149.0°F
Tensile Strength6000 - 8000psiASTM D-638
Compressive Yield Strength15000 - 17000psiASTM D-695
Flexural Strength11000 - 13000psiASTM D-790
Component B
ValueUnitsTest Method / Conditions
Mix Ratio by Weight3.0

Safety & Health

Safety Precautions
  • Normal health and safety precautions should be observed when handling these products
  • Ensure good ventilation
  • Wear gloves and safety glasses

Packaging & Availability

Packaging Type
Standard Packaging
  • All information is based on 100 grams (approximately 3.6 oz) of product being used at a room temperature and stone temperature of 77°F.
  • Times may vary based on room temperature, stone temperature, amount of hardener used, or other environmental factors.
Packaging
  • 1 -1 Quart 1 - 1 oz Tube
  • 1 - 1 Gallon 1 - 4 oz Tube
  • 1 - 5 Gallon Pail 5 - 4 oz Tubes

Storage & Handling

Storage
  • The shelf life of both parts is twelve (12) months in a dry place and in the original unopened containers at a room temperature of 59 - 77°F.
  • Do not allow product to freeze.