Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Composition
- Polyester Cream Hardener Mixed Product
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Pre-colored liquid consistency polyester adhesive
- Glossy white finish used mainly for polished stone
- Fast curing
- Used for laminating stone, filling chips and reinforcement with metal and fiberglass rods
- Good adhesion to natural stone up to 70 degrees C or 160 degrees F
- Resistant to water and oil
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Processing Conditions
- Make sure stone surfaces are clean of any substance and dry.
- Measure out the appropriate amount of polyester resin, then measure out the appropriate amount of hardener.
- ext carefully mix the components together.
- Be careful to scrape the sides and bottom of the mixing cup to ensure thorough mixing. Do not ‘stir’ product.
- This can trap air and cause bubbles.
- Do not use once gelling has begun.
- Uses
Seams, edge repair, laminating stone, filling chips and reinforcement with metal and fiberglass rods.
- Usage Location
Interior Use Only
Properties
- Physical Form
- Consistency
- Syrup
- Appearance
- Thixotropic Gel Paste
- Component A
- Typical Properties
- Component B
| Value | Units | Test Method / Conditions | |
| Mix Ratio by Weight | 100.0 | — | — |
| Value | Units | Test Method / Conditions | |
| Working Time | 5 - 7 | minutes | — |
| Tack Free | 10 - 30 | minutes | — |
| Machinable | 30 - 60 | minutes | — |
| Viscosity | 1200 - 1700 | cps | — |
| Density | 9.5 - 10 | lbs/gal | — |
| Specific Gravity | 1.14 - 1.2 | — | — |
| Hardness | 86 - 88 | Shore D | ASTM D-2240 |
| Glass Transition Temperature | 149.0 | °F | — |
| Tensile Strength | 6000 - 8000 | psi | ASTM D-638 |
| Compressive Yield Strength | 15000 - 17000 | psi | ASTM D-695 |
| Flexural Strength | 11000 - 13000 | psi | ASTM D-790 |
| Value | Units | Test Method / Conditions | |
| Mix Ratio by Weight | 3.0 | — | — |
Safety & Health
- Safety Precautions
- Normal health and safety precautions should be observed when handling these products
- Ensure good ventilation
- Wear gloves and safety glasses
Packaging & Availability
- Standard Packaging
- All information is based on 100 grams (approximately 3.6 oz) of product being used at a room temperature and stone temperature of 77°F.
- Times may vary based on room temperature, stone temperature, amount of hardener used, or other environmental factors.
- Packaging
- 1 -1 Quart 1 - 1 oz Tube
- 1 - 1 Gallon 1 - 4 oz Tube
- 1 - 5 Gallon Pail 5 - 4 oz Tubes
- Packaging
Size Sales Unit Quart 6 Gallon 2 Imperial Gallon 4 Five Gallon Bucket 1
Storage & Handling
- Storage
- The shelf life of both parts is twelve (12) months in a dry place and in the original unopened containers at a room temperature of 59 - 77°F.
- Do not allow product to freeze.